Mounting Base, Elect, in Repair/Modification of

Updated Oct 21, 2026

Solicitation from the Department of the Navy. Due Nov 19, 2026, 4:30 PM (UTC-4), 29 days left.

Official notice and attachments

Description

This RFQ is for a repair. The Small Business Administration representative at NAVSUP WSS has reviewed this requirement and determined that a set-aside recommendation was not applicable for this procurement. This contract/delivery order/purchase order/modification is issued by the Government when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email.

The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification. \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;ROCKWELL COLLINS INC; drawing number ( ;13499; ) ;822-1708-001; , Revision ;latest; and all details and specifications referenced therein.

1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification.

1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. Applicable documents - not applicable 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item.

It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order.

The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled).

3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired).

3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: MOUNTING BASE,ELECT ;822-1708-001; P/N, ;5975 015855351; NSN, ;Available repair manuals, drawings and specifications per p/n requirements; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW.

Repairs performed by the contractor or subcontractor shall be performed in accordance with the specified drawings and repair manual(s). 3.4 Changes to such manuals used for repairs under this contract, or changes to drawings or specifications used i

Contact: N731.53 · M3K · 771-229-2576 · [email protected]

Clauses in this notice (15):

• Item Unique Identification and Valuation (Jan 2023)
• Higher-Level Contract Quality Requirement
• Wide Area Workflow Payment Instructions (Jan 2023)
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Mandatory Use of Workflow Pro (WFP) Mod Assist Module
• Warranty of Supplies of a Noncomplex Nature (Jun 2003)
• Equal Opportuity for Workers with Disabilities (DEV 2026-O0040)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
• Limitations on Pass-Through Charges (DEV 2026-O0048)(Mar 2026)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
• Buy American--Balance of Payments Program Certificate-Basic (Feb 2024)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Royalty Information (Apr 1984)
• Notice of Priority Rating for National Defense, Emergency Preparedness, Andenergy Program Use (Apr 2008))

The description continues in the official notice.

Contracting contact

• [email protected] · (215) 697-1219

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 332710, a business counts as small if it has no more than 500 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Notice history

• Sep 16, 2026: Presolicitation Due Nov 2, 2026, 12:00 AM (UTC-4)

Companies that win this kind of work

Federal contractors paid for machine shops work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

• J.F. Taylor, Inc. $694,004 in this trade
• Epsilon Systems Solutions Inc $57,505 in this trade
• Strata-G Solutions, LLC $8,864 in this trade

About the buyer

The Department of the Navy awarded $129.6 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Machine Shops contracts right now

There are 35 open government contract opportunities in this trade (NAICS 332710), 13 posted in the last 7 days; 29% are set aside for small businesses. The agencies buying the most are Department of the Navy, Defense Logistics Agency and Department of the Army. Most of the work with a stated place is in Florida, Illinois and Rhode Island. A notice in this trade gives a median of 28 days from posting to deadline; this one gives 30 days.

All open machine shops contracts

Coming up in this trade

Planned contracts from the agencies' procurement forecasts, often months before a solicitation. Plans can change.

Recent awards in this trade

• Hydraulics International, Inc. $27,109 · Defense Logistics Agency · Oct 20, 2026
• Jkeys LLC $69,200 · Department of the Navy · Oct 15, 2026
• Tri-Tech Of Florida Inc $110,800 · Department of the Navy · Jun 15, 2026

From the award notices agencies publish.

Similar open machine shops bids