Home / Navy / Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing / Notice

Adapter Assembly, MI, in Repair/Modification of

Updated

Solicitation from the Department of the Navy. Due Nov 23, 2026, 4:30 PM (UTC-4), 31 days left.

Be among the first to see new Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing contracts
Only new notices that match, once a day.
Title as posted14--ADAPTER ASSEMBLY,MI, IN REPAIR/MODIFICATION OF
Solicitation numberN0038326QLB19
AgencyDepartment of the Navy
OfficeNAVSUP Weapon Systems Support
Notice typeSolicitation
Set-asideNone
Trade (NAICS)Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing (336415)
Product or service code1440
PostedOct 22, 2026
Response deadlineNov 23, 2026, 4:30 PM (UTC-4) (31 days left)
Add the deadline toGoogle Calendar · Apple / Outlook (.ics)

Official notice and attachments

Description

1. SCOPE 1.1 Articles to be furnished hereunder shall be repaired, tested andinspected in accordance with the terms and conditions specified in theRequirements Section of this document. 1.2 Unless expressly provided for elsewhere in this clause, equipment suchas fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, orany other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.3 The use of MIL-W-81381 wire in any item to be delivered under this procurement is prohibited. The foregoing prohibition applies notwithstanding any reference to MIL-W-81381 wire that may be made in any of the drawings or specifications for this procurement.

SAE-AS22759 series wire shall be used in lieu of MIL-W-81381 wire, in any place where MIL-W-81381 wire is cited in this procurement. Any questions concerning this requirement should be directed to the Procuring Contracting Officer. 1.4 If MIL-STD-454 is referenced in the drawings or in the specification,the contractor is expected to show compliance with IPC/EIAJ-STD-001C Personnel performing tasks in accordance with IPC/EIAJ-STD-001C shall be trained and certified as requried by IPC/EIAJ-STD-001C paragraph 5.1.4. 2.

Applicable documents - not applicable 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition.

3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order.

3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled).

3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired).

3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: ADAPTER ASSEMBLY,MI ;74A730501-1003; P/N, ;1440-01-455-3646; NSN, ;tech data can be found in Boeing's EDAL; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW.

Repairs performed by the contractor or subcontractor shall be performed in accordance with the specified drawings and repair manual(s). 3.4 Changes to such manuals used for repairs under this contract, or changes to drawings or specifications used in the manufacture of parts utilized in these repairs, require Procuring Contracting Officer (PCO) approval in accordance with the Configuration Management provisions of this Stateme

Contact: N792.01 · T3G · 7712290475 · [email protected]

Clauses in this notice (15):

The description continues in the official notice.

Contracting contact

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 336415, a business counts as small if it has no more than 1,250 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Notice history

Companies that win this kind of work

Federal contractors paid for guided missile and space vehicle propulsion unit and propulsion unit parts manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

About the buyer

The Department of the Navy awarded $129.6 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing contracts right now

There are 4 open government contract opportunities in this trade (NAICS 336415), 2 posted in the last 7 days; 25% are set aside for small businesses. The agencies buying the most are Department of the Navy and Defense Logistics Agency. Most of the work with a stated place is in Missouri.

All open guided missile and space vehicle propulsion unit and propulsion unit parts manufacturing contracts

Recent awards in this trade

From the award notices agencies publish.

Similar open guided missile and space vehicle propulsion unit and propulsion unit parts manufacturing bids

Linear Electro-Mechanical Actuator / 01F, LGM-30 Minuteman III Missile
Defense Logistics Agency
Due Nov 25, 2026, 2:00 PM (UTC-5) · 33 days left
Sources Sought · Posted Oct 9, 2026
Mechanism Assembly, in Repair/Modification of
Department of the Navy
Due Dec 10, 2026, 2:00 PM (UTC-4) · 48 days left
Solicitation · Posted Sep 11, 2026
Resynopsizing solicitation
Department of the Navy
Due Nov 6, 2026, 4:00 PM (UTC-5) · 14 days left
Solicitation · Saint Louis, MO · Posted Oct 22, 2026