Controller, Electric, in Repair/Modification of

Updated Oct 24, 2026

Solicitation from the Department of the Navy. Due Nov 23, 2026, 4:30 PM (UTC-4), 30 days left.

Official notice and attachments

Description

Repair Turnaround Time (RTAT) definition: The contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract. For purposes of this section, Return is defined as physical receipt of the F-condition asset at the contractor?s facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system.

In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth regular business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in the subsequent contract.

Required RTAT: #550 days after receipt of asset. Throughput Constraint: Contractor must provide a throughput Constraint for each NSN(s). Total assets to be repaired monthly after initial delivery commences X/month (contractor fill in #).

A throughput of ##____ per month reflects no throughput constraint. Induction Expiration Date: 365 days after contract award date. Any asset received after this date in days is not authorized for repair without bi-lateral agreement between the Contractor and NAVSUP WSS Contracting Officer.

Reconciliation: A reconciliation modification will be issued after final Inspection and acceptance of all assets inducted under the subsequent contract. The parties have agreed to a price (shown on the schedule page) for each unit at the negotiated RTAT. Such prices are based on the Contractor meeting the RTAT requirements described within the schedule page.

If the Contractor does not meet the applicable RTAT requirement, consideration will be assessed and subject to negotiation. All contractual documents (i.e. contracts, purchase orders, task ordersdelivery orders and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email.

The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. Early and incremental deliveries accepted and preferred. \ 1. SCOPE 1.1 .

Markings shall be in accordance with MIL-STD-130. 1.2 PRE-award / post award requirements: Due to the critical use of this item and its quality history, a pre-award survey and post-award conference may be required for all new manufacturers. For all previous sources, a post-award conference may be recommended. 1.3 Articles to be furnished hereunder shall be repaired, tested and inspected in accordance with the terms and conditions specified in the Requirements Section of this document.

1.3.1 Any item contracted for repair SHALL have a Statement of Work to ensure compliance with all repair procedures and requirements. Repair of: CONTROLLER,ELECTRIC ;6110-01-703-0671; NSN , ;2056AS4000-G05; Part Number, Shall be performed IAW: Controller,electric ;repair/overhaul/inspect IAW applicable repair manuals, technical specifications, engineering orders and drawings. LATEST DRAWING.; Publication (s).

1.3.2 There will be no repair deviation from the approved written procedures without review and acceptance by the Basic Design Engineer. All requests for Waiver/Deviation shall be via Form 1694 routed throught the Local DCMA/ACO office for review and recommendations via form 1998. 1.4 Sampling rates (AQLs) indicated below shall be used in accordance with ANSI Z1.4 for Single Sampling and a General Inspection Level of II.

1.5 In addition to the 100% PCO Mandatory, critical and major characteristics, attributes for plating, hardness and non-destructive testing will be inspected one hundred percent. 1.6 Contractor shall develop a system for identification of individual piece parts for traceability purposes. Markings shall not be permanent.

1.7 An AQL of 1.5 will be used for Class 3 threads and dimensions, and geometric feature controls with a tolerance range of .010 or less. 1.8 For minor characteristics, a sampling rate determined by the contractor and subject to QAR approval will be used. 1.9 The material covered in this contract/purchase order will be used in a crucial shipboard system enabling the launch and/or recovery of aircraft.

The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital shipboard systems or loss of aircraft. Therefore,the material has been designated as Critical material and special control procedures ar

Contact: N762.44 · P2C · (771)229-0524 · [email protected]

Clauses in this notice (14):

• Item Unique Identification and Valuation (Jan 2023)
• Higher-Level Contract Quality Requirement
• Wide Area Workflow Payment Instructions (Jan 2023)
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Mandatory Use of Workflow Pro (WFP) Mod Assist Module
• Warranty of Supplies of a Noncomplex Nature (Jun 2003)
• Equal Opportuity for Workers with Disabilities (DEV 2026-O0040)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
• Buy American--Balance of Payments Program Certificate-Basic (Feb 2024)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Royalty Information (Apr 1984)
• Notice of Priority Rating for National Defense, Emergency Preparedness, Andenergy Program Use (Apr 2008))

The description continues in the official notice.

Contracting contact

• [email protected] · (215) 697-5047

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 335312, a business counts as small if it has no more than 1,250 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Notice history

• Oct 7, 2026: Presolicitation Due Nov 23, 2026, 12:00 AM (UTC-4)

Companies that win this kind of work

Federal contractors paid for motor and generator manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

• General Electric Company $32.3 million in this trade
• Pioneer Industries, LLC $5.3 million in this trade
• Transaero, Inc. $2.5 million in this trade
• Jo-Kell Inc. $2.4 million in this trade
• Hamilton Sundstrand Corporation $2.2 million in this trade

About the buyer

The Department of the Navy awarded $129.6 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Motor and Generator Manufacturing contracts right now

There are 81 open government contract opportunities in this trade (NAICS 335312), 38 posted in the last 7 days; 27% are set aside for small businesses. The agencies buying the most are Defense Logistics Agency, Department of the Navy and Department of the Army. Most of the work with a stated place is in California and Texas. A notice in this trade gives a median of 15 days from posting to deadline; this one gives 31 days.

All open motor and generator manufacturing contracts

Coming up in this trade

Planned contracts from the agencies' procurement forecasts, often months before a solicitation. Plans can change.

Recent awards in this trade

• Advanced Products Services Inc. $350,000 · Defense Logistics Agency · Oct 23, 2026
• Commercial Parts & Service Of Columbus, Ohio, Inc. $350,000 · Defense Logistics Agency · Oct 23, 2026
• Global Logistics Strategies Inc. $350,000 · Defense Logistics Agency · Oct 23, 2026
• ASRC Federal Facilities Logistics, LLC $87,064 · Defense Logistics Agency · Oct 23, 2026
• Dircksen & Associates, Inc. $147,220 · Defense Logistics Agency · Oct 23, 2026

From the award notices agencies publish.

Similar open motor and generator manufacturing bids