Specifications

INCH-POUND

MIL-DTL-1563/15B

6 January 2014

SUPERSEDING

MIL-DTL-1563/15A

30 April 1997

DETAIL SPECIFICATION SHEET

INSIGNIA, U.S.M.A., BUTTON, CUFF

This specification is approved for use by all
Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.

MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230)
FINISH: Nickel Plated, Gold Plated, Matte Finish, Burnished Highlights. MARKING FOR IDENTIFICATION: Underside of cuff button face

DEMENSION: As Shown (REF)

SUGGESTED PACKIGING: Standard Commercial
UNIT PACKAGING: Two cuff buttons shall be mounted on a card and packaged

inside plastic box.
INTERMEDIATE PACKAGING: 100 mounted cards per box.

AMSC N/A

FSC 8455

MIL-DTL-1563/15B

FORK, PIVOT BAR:

1. Fork, pivot bar and back support construction is illustrative only and is not meant to be restrictive.
2. Solid fork type construction may be substituted for shell type construction.

NOTE:

The term (REF) refers to the measurements taken from the Government furnished hub or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian:
Army - IH

Preparing activity:
Army - IH

Review activity:

DLA - CT

(Project No. 8455-2014-017)

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.