RLP Ex. C - Security Requirements

SECURITY REQUIREMENTS -

FACILITY SECURITY LEVEL IV

THESE PARAGRAPHS CONTAIN ADDITIONAL SECURITY REQUIREMENTS THAT MAY BE

INSTALLED IN THE LEASED SPACE, AND UNLESS INDICATED OTHERWISE, ARE TO BE

PRICED AS PART OF THE BUILDING SPECIFIC AMORTIZED CAPITAL (BSAC). BECAUSE

EACH BUILDING IS UNIQUE, THE FINAL LIST OF SECURITY COUNTERMEASURES WILL BE

DETERMINED DURING THE DESIGN PHASE AND IDENTIFIED IN THE DESIGN INTENT

DRAWINGS AND CONSTRUCTION DOCUMENTS. AFTER COMPLETING THE

CONSTRUCTION DOCUMENTS, THE LESSOR SHALL SUBMIT A LIST OF THE ITEMIZED

COSTS. SUCH COSTS SHALL BE SUBJECT TO NEGOTIATION. MAINTENANCE COSTS ARE

TO BE INCLUDED IN THE OPERATING RENT.

NOTE THAT ITEMS IDENTIFIED AS “SHELL *” REPRESENT A LESSOR’S OBLIGATIONS OR

THE GOVERNMENT’S RIGHTS AND ARE NOT NECESSARILY ITEMS TO BE CONSTRUCTED. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DEFINITIONS- Definitions are the same as those used in the Lease unless re-defined in these Security Requirements.
CRITICAL AREAS AND SYSTEMS- The areas that house systems that if damaged and/or compromised could have significant adverse consequences for the facility, operation of the facility, or mission of the agency or its occupants and visitors. These areas may also be referred to as “limited access areas,” “restricted areas,” or “exclusionary zones.” Critical areas do not necessarily have to be within Government-controlled Space (e.g., generators, air handlers, electrical feeds, utilities, telecom closets or potable water supply that may be located outside Government-controlled Space).
DESIGN BASIS THREAT – The Design-Basis Threat (DBT) is the profile and estimate of the threats to a Government facility across a range of specified undesirable events and serves as the basis for determining appropriate security standards. The Lessor’s technical consultant(s) shall work in conjunction with the Government, including the Federal Protective Service (FPS), to apply the DBT to the post-award risk assessment. The Risk assessment identifies recommended countermeasures and security design features that achieve the minimum level of protection for a particular facility. The baseline level of protection may be further customized to address site-specific conditions. The Lessor is responsible for providing countermeasure provisions outlined in this Facility Security Level (FSL) document, as well as for additional items identified during the post-award risk assessment. Any additional countermeasures identified during this