Specificastions

REVISION No.

CHANGE No.

Parts Purchase and Tech Services for

225’ WLB MIDLIFE RED GEAR OVERHAUL

ORGINATED BY

Charles “Dan” Kane

DATE

DEPARTMENT / DIVISION Ice Breaker Buoy and Construction Tender Product Line (IBCTPL) Supply Branch

1.0 SCOPE

1.1 General

1.1.1 Purpose - This specification describes the requirements for the preservation, packaging, packing, marking and bar coding of spare parts purchased for the 225’ WLB Midlife Red Gear Overhaul and other repair events. Technical services are also procured via this specification.

1.1.2 Government-Furnished Property

N/A

2.0 APPLICABLE DOCUMENTS

2.1 General

2.1.1 GOVERNMENT DOCUMENTS

a. MIL-C-104C (1) Crates, Wood: Lumber and Plywood Sheathed, Nailed, and Bolted.
b. MIL-STD-2073-1E Method 10, Standard Practice for Military Packaging. c. ASTM D6039/D6039M: Standard Specification for Open and Covered Wood Crates.
d. ASTM D3951-15 Standard Practice for Commercial Packaging.

2.2.2 COAST GUARD DRAWINGS

None

2.1.3 COAST GUARD PUBLICATIONS

USCG Technical Publication 3523-241-A – Reduction Gear – Model 96DHCMGH-CP USCG Technical Publication 3523-241-B – Reduction Gear – Model 96DHCMGH-CP

2.1.4 U.S. COAST GUARD SURFACE FORCES LOGISTICS CENTER (SFLC)

DOCUMENTS

D-084-0481 Preservation, Packaging and Marketing
2.2 DOCUMENT AVAILABILITY - The documents listed in this section are referenced in sections 3, 4 and 5 of this specification and drawings stated in this specification. To obtain the referenced documents, see section 6.0.
2.3 COMMERCIAL DOCUMENTS - The following documents form a part of this specification to the extent specified herein. The documents shall be the version listed by

number and date from the referenced industry organization. Commercial documents may also be listed in the Department of Defense Index of Specifications and Standards (DODISS). a.

ISO/IEC 17025, Testing and calibration laboratories of Measuring and Test Equipment.

b.

ANSI/ASQ Q9001-2008, Quality Management Systems- Model for Quality Assurance in Design, Development, Production, Installation, and Servicing Requirements.

c.

ISO/IEC-16388-2007, Bar Coding - Code 39 Symbology.

2.4 SPECIFICATION ORDER OF PRECEDENCE - The Applicable Documents described are required to be adhered to in fulfilling the contract. In the event of a conflict between the text of this specification and the references cited herein, this work item shall take precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.