Cable ASSY, Aircraft

Updated Nov 10, 2026

Solicitation from the Defense Logistics Agency. Due Dec 7, 2026, 4:30 PM (UTC-4), 27 days left.

Description

This is a NEW SPARES requirement. No drawings are available for this requirement. Notice to Distributors/Offerors: Consideration for award shall be given only to authorized distributors of the Original Equipment Manufacturer (OEM).

If quoting as a distributor, the offeror MUST submit an unredacted OEM Distributor Letter explicitly authorizing resale of this Part Number at the exact time of proposal submission. Failure to provide this documentation with the initial offer will result in the quote being determined non-responsive and excluded from evaluation. For Critical Safety Items (CSI), DFARS clause 252.209-7010, Identification of Critical Safety Items, is incorporated by reference.

For items for which Government inspection and acceptance will be conducted at the source, DLAD clause 52.246-9004, Product Verification Testing, is incorporated by reference. DLAD clauses can be viewed at dla.mil/Acquisition/Pages/DLAD.....

As applicable, DFARS clause 252.242-7005, Contractor Business Systems, is incorporated by reference. \ 1. SCOPE 1.1 Articles to be furnished hereunder shall be repaired, tested and inspected in accordance with the terms and conditions specified in the Requirements Section of this document. 1.1.1 Any item contracted for repair SHALL have a Statement of Work to ensure compliance with all repair procedures and requirements.

Repair of: CABLE ASSY,AIRCRAFT ;4920 014974067; NSN , ;3654AS5180-1; Part Number, Shall be performed IAW: CABLE ASSY,AIRCRAFT ;Latest; Publication (s). 1.1.2 There will be no repair deviation from the approved written procedures without review and acceptance by the Basic Design Engineer. All requests for Waiver/Deviation shall be via Form 1694 routed throught the Local DCMA/ACO office for review and recommendations via form 1998. 2.

Applicable documents - not applicable 3. REQUIREMENTS Potential sources must ensure they are able to repair or procure all parts listed on the NAVAIR spec controlled drawing to be in consideration as an approved source of repair for this item. 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item.

It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order.

The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled).

3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired).

3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary faci

Clauses in this notice (21):

• Item Unique Identification and Valuation (Jan 2023)
• Inspection of Supplies--Fixed-Price (Aug 1996)
• Higher-Level Contract Quality Requirement
• Wide Area Workflow Payment Instructions (Jan 2023)
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Mandatory Use of Workflow Pro (WFP) Mod Assist Module
• Value Engineering (Jun 2020)
• Integrity of Unit Prices (Nov 2021)
• Equal Opportunity for Veterans (DEV 2026-O0040)(Feb 2026)
• Warranty of Supplies of a Noncomplex Nature (Jun 2003)
• Equal Opportuity for Workers with Disabilities (DEV 2026-O0040)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
• Federal Acquisition Supply Chain Security Act Orders-Prohibition (Dec 2023)
• Notice of Total Small Business Set-Aside (DEV 2026-O0037)(Feb 2026)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
• Buy American--Balance of Payments Program Certificate-Basic (Feb 2024)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Royalty Information (Apr 1984)
• Instructions to Offerors--Competitive Acquisition (DEV 2026-O0048)(Mar 2026)
• Notice of Priority Rating for National Defense, Emergency Preparedness, Andenergy Program Use (Apr 2008))

The description continues in the official notice.

Contracting contact

• [email protected] · (215) 737-4024

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 332710, a business counts as small if it has no more than 500 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Notice history

• Oct 21, 2026: Presolicitation Due Dec 7, 2026, 12:00 AM (UTC-4)

Companies that win this kind of work

Federal contractors paid for machine shops work, who also hold DLA contracts (last 12 months): possible competitors, or partners to team with.

• J.F. Taylor, Inc. $694,004 in this trade
• Strata-G Solutions, LLC $8,864 in this trade

About the buyer

The Defense Logistics Agency awarded $46.7 billion in contracts in the last 12 months; its biggest suppliers were Amerisourcebergen Drug Corp, Atlantic Diving Supply, Inc. and W S Darley & Co. See what DLA is buying now.

Machine Shops contracts right now

There are 37 open government contract opportunities in this trade (NAICS 332710), 10 posted in the last 7 days; 27% are set aside for small businesses. The agencies buying the most are Department of the Navy, Defense Logistics Agency and Department of the Army. Most of the work with a stated place is in Tennessee, New Jersey and Indiana. A notice in this trade gives a median of 26 days from posting to deadline; this one gives 28 days.

All open machine shops contracts

Recent awards in this trade

• Disan Engineering Corp $26,240 · Defense Logistics Agency · Nov 4, 2026
• Engstroms Welding & Machine, Inc. $36,000 · Defense Logistics Agency · Nov 4, 2026
• Hydraulics International, Inc. $27,109 · Defense Logistics Agency · Oct 20, 2026
• Jkeys LLC $69,200 · Department of the Navy · Oct 15, 2026
• Tri-Tech Of Florida Inc $110,800 · Department of the Navy · Jun 15, 2026

From the award notices agencies publish.

Similar open machine shops bids