Cone, Inlet, Aircraft

Updated Nov 5, 2026

Solicitation from the Department of the Navy. Due Dec 4, 2026, 4:30 PM (UTC-4), 29 days left.

Description

Repair Turnaround Time (RTAT) definition: The contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract. For purposes of this section, Return is defined as physical receipt of the F-condition asset at the contractor?s facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system.

In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth regular business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in the subsequent contract.

Required RTAT: 165 days after receipt of asset Throughput Constraint: Contractor must provide a throughput Constraint for each NSN(s). Total assets to be repaired monthly after initial delivery commences X/month (contractor fill in #). A throughput of ##____ per month reflects no throughput constraint.

InductionExpiration Date: 365 days after contract award date. Any asset received after this date in days is not authorized for repair without bi-lateral agreement between the Contractor and NAVSUP WSS Contracting Officer. Reconciliation:A reconciliation modification will be issued after final Inspection and acceptance of all assets inducted under the subsequent contract.

The parties have agreed to a price (shown on the schedule page) for each unit at the negotiated RTAT. Such prices are based on the Contractor meeting the RTAT requirements described within the schedule page. If the Contractor does not meet the applicableRTAT requirement, consideration will be assessed and subject to negotiation.

All contractual documents (i.e. contracts, purchase orders, task ordersdelivery orders and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein.

Early and incremental deliveries accepted and preferred. 1. SCOPE 1.1 .

Markings shall be in accordance with MIL-STD-130. 1.2 Articles to be furnished hereunder shall be repaired, tested andinspected in accordance with the terms and conditions specified in theRequirements Section of this document. 1.3 Unless expressly provided for elsewhere in this clause, equipment suchas fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, orany other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.4 The use of MIL-W-81381 wire in any item to be delivered under this procurement is prohibited. The foregoing prohibition applies notwithstanding any reference to MIL-W-81381 wire that may be made in any of the drawings or specifications for this procurement.

SAE-AS22759 series wire shall be used in lieu of MIL-W-81381 wire, in any place where MIL-W-81381 wire is cited in this procurement. Any questions concerning this requirement should be directed to the Procuring Contracting Officer. 1.5 If MIL-STD-454 is referenced in the drawings or in the specification,the contractor is expected to show compliance with IPC/EIAJ-STD-001C Personnel performing tasks in accordance with IPC/EIAJ-STD-001C shall be trained and certified as requried by IPC/EIAJ-STD-001C paragraph 5.1.4. 2.

Applicable documents - not applicable 3. REQUIREMENTS The contractor shall maintain a quality control system which meets the requirements of Mil-I-45208A, Mil-Q 9858,ISO-9000 / 9001 / 9002 or equivalent. Responsibility for inspection: Unless otherwise specified, the contractor is responsible for the performance of all inspection requirements as specified herein.

Except as otherwise specified, the contractor may use his own or any other facility suitable for the performance of the inspection requirements specified herein. PROCEDURES:The contractor shall prepare and maintain Quality Control Documentation, test and repair procedures, and inspection procedures which shall be made available to the Government for review and approval. The procedures shall include seq

Contact: N763.05 · P5F · 771-229-0468 · [email protected]

Clauses in this notice (15):

• Item Unique Identification and Valuation (Jan 2023)
• Higher-Level Contract Quality Requirement
• Wide Area Workflow Payment Instructions (Jan 2023)
• Monetary Limitation Repair Purchase Orders
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Mandatory Use of Workflow Pro (WFP) Mod Assist Module
• Warranty of Supplies of a Noncomplex Nature (Jun 2003)
• Equal Opportuity for Workers with Disabilities (DEV 2026-O0040)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
• Buy American--Balance of Payments Program Certificate-Basic (Feb 2024)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Royalty Information (Apr 1984)
• Notice of Priority Rating for National Defense, Emergency Preparedness, Andenergy Program Use (Apr 2008))

The description continues in the official notice.

Contracting contact

• [email protected] · (215) 697-1303

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 336412, a business counts as small if it has no more than 1,500 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Companies that win this kind of work

Federal contractors paid for aircraft engine and engine parts manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

• RTX Corporation $5.5 billion in this trade
• General Electric Company $1.3 billion in this trade
• Rolls-Royce Corporation $962.4 million in this trade
• The Boeing Company $306.6 million in this trade
• Lockheed Martin Corporation $136.5 million in this trade

About the buyer

The Department of the Navy awarded $132.7 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Aircraft Engine and Engine Parts Manufacturing contracts right now

There are 282 open government contract opportunities in this trade (NAICS 336412), 61 posted in the last 7 days; 13% are set aside for small businesses. The agencies buying the most are Defense Logistics Agency, Department of the Air Force and Department of the Navy. Most of the work with a stated place is in Oklahoma, Virginia and Ohio. A notice in this trade gives a median of 365 days from posting to deadline; this one gives 30 days.

All open aircraft engine and engine parts manufacturing contracts

Coming up in this trade

Planned contracts from the agencies' procurement forecasts, often months before a solicitation. Plans can change.

Recent awards in this trade

• Transaero, Inc. $61,375 · Defense Logistics Agency · Nov 4, 2026
• Aviarms Support Corp $26,085 · Defense Logistics Agency · Nov 4, 2026
• Triman Industries Inc $555,139 · Defense Logistics Agency · Nov 4, 2026
• J.G.W. (International) LTD. $27,272 · Defense Logistics Agency · Nov 3, 2026
• Stein Seal Company $350,000 · Defense Logistics Agency · Nov 3, 2026

From the award notices agencies publish.

Similar open aircraft engine and engine parts manufacturing bids