Home / Navy / Commercial and Service Industry Machinery Manufacturing / Notice

Display Unit, Helmet

Updated Nov 4, 2026

Solicitation from the Department of the Navy. Due Dec 3, 2026, 2:00 PM (UTC-4), 29 days left.

Title as posted	DISPLAY UNIT,HELMET
Solicitation number	N0038327RAA21
Agency	Department of the Navy
Office	NAVSUP Weapon Systems Support
Notice type	Solicitation
Set-aside	None
Trade (NAICS)	Commercial and Service Industry Machinery Manufacturing (333310)
Product or service code	1240
Posted	Nov 3, 2026
Response deadline	Dec 3, 2026, 2:00 PM (UTC-4) (29 days left)
Add the deadline to	Google Calendar · Apple / Outlook (.ics)

Official noticeSend to a teammate

Description

1. SCOPE 1.1 Articles to be furnished hereunder shall be repaired, tested andinspected in accordance with the terms and conditions specified in theRequirements Section of this document. 1.2 Unless expressly provided for elsewhere in this clause, equipment suchas fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, orany other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.3 The use of MIL-W-81381 wire in any item to be delivered under this procurement is prohibited. The foregoing prohibition applies notwithstanding any reference to MIL-W-81381 wire that may be made in any of the drawings or specifications for this procurement.

SAE-AS22759 series wire shall be used in lieu of MIL-W-81381 wire, in any place where MIL-W-81381 wire is cited in this procurement. Any questions concerning this requirement should be directed to the Procuring Contracting Officer. 1.4 If MIL-STD-454 is referenced in the drawings or in the specification,the contractor is expected to show compliance with IPC/EIAJ-STD-001C Personnel performing tasks in accordance with IPC/EIAJ-STD-001C shall be trained and certified as requried by IPC/EIAJ-STD-001C paragraph 5.1.4. 2.

Applicable documents - not applicable 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition.

3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order.

3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled).

3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired).

3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor.

The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: DISPLAY UNIT,HELMET ;62052-01-05; P/N, ;1240 014696497; NSN, ;OEM Technical Drawings; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW.

Repairs performed by the contractor or subcontractor shall be perfor

Clauses in this notice (25):

Item Unique Identification and Valuation (Jan 2023)
Inspection of Supplies--Fixed-Price (Aug 1996)
Higher-Level Contract Quality Requirement
Stop-Work Order (Aug 1989)
Wide Area Workflow Payment Instructions (Jan 2023)
Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
Firm Fixed Price Repair Purchase Orders
Mandatory Use of Workflow Pro (WFP) Mod Assist Module
Value Engineering (Jun 2020)
Integrity of Unit Prices (Nov 2021)
Equal Opportunity for Veterans (DEV 2026-O0040)(Feb 2026)
Small Business Subcontracting Plan (DEV 2026-O0037)(Feb 2026)
Safeguarding Sensitive Conventional Arms, Ammunition, and Explosives (Nov 2023)
Equal Opportuity for Workers with Disabilities (DEV 2026-O0040)(Feb 2026)
Transportation of Supplies by Sea (Oct 2024)
Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
Small Business Subcontracting Plan (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(Jul 2026))
Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
Buy American--Balance of Payments Program Certificate-Basic (Feb 2024)
Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
Royalty Information (Apr 1984)
Type of Contract (DEV 2026-O0045)(Mar 2026)
Notice of Priority Rating for National Defense, Emergency Preparedness, Andenergy Program Use (Apr 2008))
Only One Offer (Deviation 2026-O0048)(Mar 2026)

The description continues in the official notice.

Contracting contact

[email protected] · (215) 697-4313

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 333310, a business counts as small if it has no more than 1,000 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Companies that win this kind of work

Federal contractors paid for commercial and service industry machinery manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

Elbit Systems Of America - Night Vision LLC $302.8 million in this trade
The Boeing Company $266.0 million in this trade
Envision Technology, LLC $65.6 million in this trade
J.F. Taylor, Inc. $13.3 million in this trade
General Dynamics Mission Systems, Inc. $5.1 million in this trade

About the buyer

The Department of the Navy awarded $132.7 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Commercial and Service Industry Machinery Manufacturing contracts right now

There are 57 open government contract opportunities in this trade (NAICS 333310), 26 posted in the last 7 days; 53% are set aside for small businesses. The agencies buying the most are Defense Logistics Agency, Department of the Navy and Department of the Army. Most of the work with a stated place is in Pennsylvania, Virginia and Arizona. A notice in this trade gives a median of 15 days from posting to deadline; this one gives 30 days.

All open commercial and service industry machinery manufacturing contracts