Gasket, EMI

Updated Nov 3, 2026

Solicitation from the Department of the Navy. Due Nov 30, 2026, 4:30 PM (UTC-4), 27 days left.

Bid documents (1)

• Bid document controlled: request access on SAM.gov

Paid members download every document from this page, or buy this bid alone.

Description

TO VIEW THE DRAWINGS: Go to www.beta.sam.gov/

Click: Contract Opportunities and enter the solicitation number. This gives you access to the Electronic Solicitation. Drawings can be viewed or downloaded.

Government source inspection per FAR 52.246-2 is required. DELIVERY_____90__________DAYS. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited inthe mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email.

The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein.

1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture of the GASKET, EMI .
2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number".

These items should be retained until an award is made. 2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

2.1.3 The "Document Changes" section provides supersessions/changes to referenced documents. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the drawings shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

Document change data=DOD-STD-100 |cancelled document change data=MIL-STD-285 |cancelled 3. REQUIREMENTS 3.1 Manufacturing and Design - The GASKET, EMI furnished under this contract/purchase order shall meet the material and physical requirements as specified ;ON DRAWING NUMBER 7221899-1 (53711) REV -; . 3.2 Marking - Unless marking requirements are specified by a document or drawing cited in this solicitation all items delivered under this contract/purchase order shall be marked and identified in accordance with the applicable Military Standards and Specifications as follows: Mechanical Parts, Assemblies and Equipments - MIL-STD-130 Electrical and Electronic Parts - MIL-STD-1285, Method 1.

Electrical and Electronic Parts and Assemblies not covered by MIL-STD-1285-use MIL-STD-130. Electronic Equipment - MIL-STD-454 Requirement Number 67. Electrical Equipment - MIL-P-15024/5 (SHIPS) 3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated.

The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa.

17055-0788.) 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government.

The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program.

The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase or

Contact: N97113D · FBA · +1 771-229-0462 · [email protected]

Clauses in this notice (12):

• Item Unique Identification and Valuation (Jan 2023)
• Inspection of Supplies--Fixed-Price (Aug 1996)
• Stop-Work Order (Aug 1989)
• General Information-Fob-Destination
• Wide Area Workflow Payment Instructions (Jan 2023)
• Note for Contractor/Administrative Contracting Officer
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Notice of Cybersecurity Maturity Model Certification Level Requirements (Nov 2025))
• Notice of Total Small Business Set-Aside (DEV 2026-O0037)(Feb 2026)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Notice of Priority Rating for National Defense, Emergency Perpardeness, and ENRGY Progam Use (April 2008))

Documents referenced (7): DOD-STD-100, MIL-STD-130, QQ-N-281, MIL-STD-285, AMS 4730, ASTM-D3574, UL94

Drawings (3): 3203212, 7101655, 7221899

The description continues in the official notice.

Contracting contact

• [email protected] · (717) 605-2172

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 333998, a business counts as small if it has no more than 700 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Notice history

• Aug 28, 2026: Solicitation Due Sep 30, 2026, 4:30 PM (UTC-4)
• Jul 31, 2026: Solicitation Due Aug 24, 2026, 4:30 PM (UTC-4)
• Jul 23, 2026: Solicitation Due Aug 24, 2026, 4:30 PM (UTC-4)

Companies that win this kind of work

Federal contractors paid for all other miscellaneous general purpose machinery manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

• Elbitamerica, Inc. $14.4 million in this trade
• Integrated Procurement Technologies $4.6 million in this trade
• Jamaica Bearings Co., Inc. $3.6 million in this trade
• Supplycore LLC $2.9 million in this trade
• S I T Corporation $1.5 million in this trade

About the buyer

The Department of the Navy awarded $132.7 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

All Other Miscellaneous General Purpose Machinery Manufacturing contracts right now

There are 106 open government contract opportunities in this trade (NAICS 333998), 59 posted in the last 7 days; 25% are set aside for small businesses. The agencies buying the most are Department of the Navy, Defense Logistics Agency and Department of the Army. Most of the work with a stated place is in District of Columbia, Illinois and Florida. A notice in this trade gives a median of 16 days from posting to deadline; this one gives 28 days.

All open all other miscellaneous general purpose machinery manufacturing contracts

Coming up in this trade

Planned contracts from the agencies' procurement forecasts, often months before a solicitation. Plans can change.

Recent awards in this trade

• Integrated Procurement Technologies $350,000 · Defense Logistics Agency · Nov 2, 2026
• Hydraulics International, Inc. $350,000 · Defense Logistics Agency · Nov 2, 2026
• Kampi Components Co Inc $350,000 · Defense Logistics Agency · Nov 2, 2026
• Independent Rough Terrain Center LLC $350,000 · Defense Logistics Agency · Nov 2, 2026
• JLG Industries, Inc. $350,000 · Defense Logistics Agency · Nov 2, 2026

From the award notices agencies publish.

Similar open all other miscellaneous general purpose machinery manufacturing bids