T-38 Central Fuselage Station (CFS) 505 Drill Fixtures Assemblies

Updated Nov 4, 2026

Sources Sought from the Department of the Air Force, for work in JBSA Randolph, Texas. Due Nov 17, 2026, 3:00 PM (UTC-7), 13 days left.

Federal prevailing wage rates for this place: Texas Davis-Bacon and SCA wage determinations.

Description

Title: Sources Sought / RFI: T-38 Central Fuselage Station (CFS) 505 Drill Fixture Assemblies Notice Type: Sources Sought / Request for Information (RFI) Product Service Code (PSC): 3455 - Cutting Tools for Machine Tools (Alternative: 1560 - Airframe Structural Components) NAICS Code: 333514 - Special Die and Tool, Die Set, Jig, and Fixture Manufacturing (Socio-economic Size Standard: 500 Employees) Location: 309th Aircraft Maintenance Group (AMXG) / 575th AMXS, Randolph AFB, TX 78150 1.

Disclaimer & Important Notes This is a Request for Information (RFI) / Sources Sought notice only. This notice is issued solely for information, planning, and market research purposes in accordance with FAR 15.201(e). It does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or an invitation for bid.

The Government does not intend to award a contract on the basis of this RFI or to otherwise pay for the information solicited. Respondents are advised that the U.S. Government will not be responsible for any costs incurred in preparing or submitting a response to this notice. All submissions will become Government property and will not be returned.

Security & Technical Drawing Access Notice: To maintain operational security, no engineering drawings, CAD models, or technical data packages will be uploaded or publicly released during this initial market research phase. The technical sourcing parameters in Section 2 provide sufficient industrial detail for facilities to assess their capabilities. During the subsequent formal solicitation phase, the complete, certified Technical Data Package (TDP)—including all JCG230321 engineering drawings and 3D CAD SolidWorks/STEP/IGES models—will be fully provided under secure DLA Joint Certification Program (JCP) verification to all qualified bidders.

2. Technical Sourcing Profile The Department of the Air Force, 309th Aircraft Maintenance Group (AMXG), 575th AMXS, Randolph AFB, TX, is conducting market research to identify potential sources capable of manufacturing, fabricating, and delivering: Item Description: T-38 CFS 505 Drill Fixtures Kit (Precision drill fixture plate, custom-molded transport case, and corresponding accessories) Design Specification: Fabricated to Drawing Configuration JCG230321 Quantity: Five (5) Configuration Sets Required Lead Time: Three (3) Months / 90 Calendar Days from contract award (Critical Path) FOB Point: FOB Destination (851 4th St West Bldg 241, Randolph AFB, TX 78150) Salient Technical & Manufacturing Parameters: Envelope Dimensions: Approximately 14" Length x 10" Width x 6" Height (to be stored in a custom three-layer foam insert within a Pelican Model 1400 Protector Case).

Material Requirements: High-strength tool steels (e.g., A2, D2, or pre-hardened 4140 alloys) requiring precision heat-treatment, stress-relieving, and black oxide or equivalent corrosion-resistant coating. Machining Operations: Substantive multi-axis CNC vertical milling, wire EDM (Electrical Discharge Machining), and precision surface grinding to hold dimensional tolerances down to $\pm$ 0.001 inches on critical interface bores.

Packaging, Cushioning, and 3-Layer Kitting: The Pelican Model 1400 case must be configured with three (3) distinct, stacked, and nested layers of precision CNC-cut or water-jet cut, closed-cell polyethylene foam (no pick-and-pluck allowed): Layer 1 (Top Layer): Custom-cut pockets contoured for A and D Holes on the fuselage and boattail sides. Layer 2 (Middle Layer): Custom-cut pockets contoured for B Holes on the fuselage and boattail sides.

Layer 3 (Bottom Layer): Custom-cut pockets contoured for C Holes on the fuselage and boattail sides. Each layer shall feature high-contrast lettering identifying components and center finger pulls/tabs for easy lifting. 3.

Critical Sourcing & Quality Parameters Buy American & Specialty Metals: This requirement is subject to the Buy American statute (41 U.S.C. Chapter 83) as implemented by FAR Part 25 and DFARS Part 225. In accordance with DFARS 252.225-7009, any specialty metals (including tool steels) used to fabricate the drill fixtures must be melted or produced within the United States or a qualifying allied country.

First Article Inspection (FAI): Unless the selected contractor is the original manufacturer or has previously fabricated this exact fixture for the USAF, a First Article Inspection in accordance with AS9102 and a certified CMM dimensional calibration sheet will be required prior to full-scale production. 4. Capability Statement Submission Requirements Interested and capable manufacturing firms are requested to submit a Capability Statement (not exceeding 4 pages) addressing the following: Company Profile: Company Name, Physical Address, CAGE Code, UEI, active Joint Certification Program (JCP) Number (DD Form 2345), and Small Business socio-economic status.

Machining Competency: Describe your facility's in-house equipment (e.g., multi-axis CNC mills, wire EDM, surface grinders, and Coordinate Measuring Machines) and your experience holding tolerances of $\pm$ 0.001 inches on tool steel. Past Performance: Provide up to three (3) examples of similar high-tolerance aerospace assembly tooling, drill jigs, or flight-critical fixtures manufactured by your firm within the last 3 years.

Lead Time Feasibility: Confirm whether your firm can source raw specialty steels, program tooling paths, fabricate, perform heat treatment, and deliver 5 completed assemblies within 90 calendar days of contract award. If 90 days is not feasible, provide your best realistic lead time. Rough Order of Magnitude (ROM): Provide a non-binding estimated cost range for fabricating 5 units of the drill fixture kit.

If possible, please break down estimated machining labor hours versus raw material costs. Submission Email: [email protected] Submission Deadline: November 17, 2026, by 1500 MST Email Subject Line: RFI Response: T-38 CFS 505 Drill Fixtures - [Your Company Name]

Contracting contact

• Willie Little · [email protected] · (801) 586-6837
• Joshua Akinwande · [email protected] · (801) 882-8454

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 333514, a business counts as small if it has no more than 500 employees (SBA size standard). This notice is set aside, so only businesses under that size, or in the named program, can bid. SBA table, current as of Oct 15, 2026.

Companies that win this kind of work

Federal contractors paid for special die and tool, die set, jig, and fixture manufacturing work, who also hold Air Force contracts (last 12 months): possible competitors, or partners to team with.

• Raytheon Company $5.9 million in this trade

About the buyer

The Department of the Air Force awarded $83.4 billion in contracts in the last 12 months; its biggest suppliers were The Boeing Company, The Boeing Company and Raytheon Company. See what Air Force is buying now.

Special Die and Tool, Die Set, Jig, and Fixture Manufacturing contracts right now

There are 3 open government contract opportunities in this trade (NAICS 333514), 3 posted in the last 7 days; 67% are set aside for small businesses. The agencies buying the most are Department of the Air Force and Defense Logistics Agency. Most of the work with a stated place is in Oklahoma, Texas and Alabama.

All open special die and tool, die set, jig, and fixture manufacturing contracts

Coming up in this trade

Planned contracts from the agencies' procurement forecasts, often months before a solicitation. Plans can change.

Similar open special die and tool, die set, jig, and fixture manufacturing bids