Valve, Check

Updated Oct 29, 2026

Solicitation from the Department of the Navy. Due Nov 27, 2026, 4:30 PM (UTC-4), 29 days left.

Description

According to FAR 52.204-8: (1) The North American Industry Classification System (NAICS) code for this acquisition is 332919. (2) The small business size standard is 750. \

1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the VALVE,CHECK .
2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor.

Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The VALVE,CHECK furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no. ;34228 8590952-D1217483; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; .

3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor.

If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable.

3.4 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order.

3.4.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR.

Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance.

3.4.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted to the NAVSUP WSS Contracting Specialist via eMail. 3.4.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract.

ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change classification (Class I or Class II), and change justification

Contact: N741.P13 · N00104 · 771-229-0591 · [email protected]

Clauses in this notice (16):

• Item Unique Identification and Valuation (Jan 2023)
• Inspection of Supplies--Fixed-Price (Aug 1996)
• Higher-Level Contract Quality Requirement
• Wide Area Workflow Payment Instructions (Jan 2023)
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Mandatory Use of Workflow Pro (WFP) Mod Assist Module
• Warranty of Supplies of a Noncomplex Nature (June 2003)
• Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
• Small Business Subcontracting Plan (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(Jul 2026))
• Contractor Purchasing System Administration-Basic (DEV 2026-O0015)(Jul 2026)
• Limitations on Pass-Through Charges (DEV 2026-O0048)(Mar 2026)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
• Buy American-Balance of Payments Program Certificate-Basic (Feb 2024)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Notice of Priority Rating for National Defense, Emergency Perpardeness, and ENRGY Progam Use (April 2008))

Documents referenced (2): MIL-STD-129, MIL-STD-130

The description continues in the official notice.

Contracting contact

• [email protected] · (215) 697-0000

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 332919, a business counts as small if it has no more than 750 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Companies that win this kind of work

Federal contractors paid for other metal valve and pipe fitting manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

• Bell Boeing Joint Project Office $9.7 million in this trade
• Ruta Supplies Inc $5.0 million in this trade
• JA Moody LLC $4.4 million in this trade
• Leslie Controls, Inc. $3.4 million in this trade
• Hamilton Sundstrand Corporation $1.7 million in this trade

About the buyer

The Department of the Navy awarded $132.1 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Other Metal Valve and Pipe Fitting Manufacturing contracts right now

There are 202 open government contract opportunities in this trade (NAICS 332919), 81 posted in the last 7 days; 8% are set aside for small businesses. The agencies buying the most are Department of the Navy, Defense Logistics Agency and Department of Veterans Affairs. Most of the work with a stated place is in Maine, California and Massachusetts. A notice in this trade gives a median of 29 days from posting to deadline; this one gives 30 days.

All open other metal valve and pipe fitting manufacturing contracts

Coming up in this trade

Planned contracts from the agencies' procurement forecasts, often months before a solicitation. Plans can change.

Recent awards in this trade

• JA Moody LLC $77,898 · Defense Logistics Agency · Oct 28, 2026
• Artex Truck Center Inc $350,000 · Defense Logistics Agency · Oct 27, 2026
• S3 Aerodefense LLC $349,900 · Defense Logistics Agency · Oct 27, 2026
• Martin Military Inc $51,908 · Defense Logistics Agency · Oct 23, 2026
• Circor Naval Solutions LLC $66,873 · Defense Logistics Agency · Oct 22, 2026

From the award notices agencies publish.

Similar open other metal valve and pipe fitting manufacturing bids