Washer, Flat

Updated Oct 29, 2026

Solicitation from the Department of the Navy. Due Nov 27, 2026, 4:30 PM (UTC-4), 29 days left.

Description

According to FAR 52.204-8: (1) The North American Industry Classification System (NAICS) code for this acquisition is 332722. (2) The small business size standard is 500. \

1. SCOPE 1.1 ;This procurement specification contains the requirements for manufacture and the contract quality requirements for ;Gasket; for use on Navy submarines.;
2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number".

These items should be retained until an award is made. 2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

2.1.3 The "Document Changes" section provides supersessions/changes to referenced documents. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

Document change data=MIL-M-20693 |ASTM-D4066 3. REQUIREMENTS 3.1 ;Design and Manufacturing - The ;Gasket; furnished under this contract/purchase order shall meet the material, physical and test requirements as specified in Military Specifications MIL-H-21367(SH), MIL-H-21367/1(SH), Item No. 12 and ASTM-D4066 including associated specifications mentioned in this procurement. ; 3.2 ;The ;Gasket; shall be manufactured per material specification ASTM-D4066, Type PA0314 (Group 03/11 Nylon, Class 1, and Grade 4) due to MIL-M-20693B is cancelled.; 3.3 ;Marking Requirements - The supplier shall mark ;tag or bag; each production lot unit ;Gasket; with the applicable specification/item, lot or batch, serial and contract number per MIL-STD-130.; 3.4 ;Notification - The supplier shall notify Naval Surface Warfare Center, Philadelphia Division, (NSWCPD), 5001 S. Broad Street, Philadelphia, PA 19112-1403 by email [email protected], Code 242MO after award of contract.; 3.4.1 ;The NSWCPD is the acceptance activity for the Contract Data Requirements List (DD1423) Data Items.

NSWCPD WAWF/IRAPT ;Acceptor; DODACC is ;N64498;.; 3.5 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa.

17055-0788.) 3.5.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation.

Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority. Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below.

The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788. Contractors are ca

Contact: N741.P13 · N00104 · 771-229-0591 · [email protected]

Clauses in this notice (16):

• Item Unique Identification and Valuation (Jan 2023)
• Inspection of Supplies--Fixed-Price (Aug 1996)
• Higher-Level Contract Quality Requirement
• Wide Area Workflow Payment Instructions (Jan 2023)
• Navy Use of Abilityone Support Contractor - Release of Offeror Information (3-18))
• Mandatory Use of Workflow Pro (WFP) Mod Assist Module
• Warranty of Supplies of a Noncomplex Nature (June 2003)
• Buy American-Free Trade Agreements-Balance of Payments Program-Basic (Feb 2024)
• Small Business Subcontracting Plan (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(Jul 2026))
• Contractor Purchasing System Administration-Basic (DEV 2026-O0015)(Jul 2026)
• Limitations on Pass-Through Charges (DEV 2026-O0048)(Mar 2026)
• Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
• Buy American-Free Trade Agreements-Balance of Payments Program Certificate-Basic (Feb 2024))
• Buy American-Balance of Payments Program Certificate-Basic (Feb 2024)
• Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
• Notice of Priority Rating for National Defense, Emergency Perpardeness, and ENRGY Progam Use (April 2008))

Documents referenced (9): MIL-STD-130, ISO 10012, MIL-I-45208, NCSL Z540.3, MIL-H-21367E (SH), MIL-H-21367/1 (SH), ASTM-D4066, ISO9001, MIL-STD-973

The description continues in the official notice.

Contracting contact

• [email protected] · (215) 697-0000

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 332722, a business counts as small if it has no more than 600 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Companies that win this kind of work

Federal contractors paid for bolt, nut, screw, rivet, and washer manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

• Lockheed Martin Corporation $14.5 million in this trade
• RTX Corporation $8.4 million in this trade
• Pioneer Industries, LLC $3.3 million in this trade
• Leslie Controls, Inc. $682,895 in this trade
• Parker-Hannifin Corporation $227,693 in this trade

About the buyer

The Department of the Navy awarded $132.1 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing contracts right now

There are 110 open government contract opportunities in this trade (NAICS 332722), 68 posted in the last 7 days; 47% are set aside for small businesses. The agencies buying the most are Defense Logistics Agency, Department of the Navy and Department of the Army. Most of the work with a stated place is in Maine, Pennsylvania and Virginia. A notice in this trade gives a median of 12 days from posting to deadline; this one gives 30 days.

All open bolt, nut, screw, rivet, and washer manufacturing contracts

Recent awards in this trade

• Global Logistics Strategies Inc. $80,220 · Defense Logistics Agency · Oct 28, 2026
• Outsource Electronics Manufacturing, Inc. $350,000 · Defense Logistics Agency · Oct 28, 2026
• J. T. D. Stamping Co Inc $350,000 · Defense Logistics Agency · Oct 28, 2026
• ATF Aerospace, LLC $350,000 · Defense Logistics Agency · Oct 28, 2026
• Heartland Patriot Supply LLC $25,322 · Defense Logistics Agency · Oct 27, 2026

From the award notices agencies publish.

Similar open bolt, nut, screw, rivet, and washer manufacturing bids