98747 NULL C 0001 C NULL 0001 753 U N Y N D

~

Landing Gear

A
B
C

See EO NO. 15A7142-H

SEE EO NO. 17A0716-H

20150622

N. DAGSEN

180418
190528

LZPEX-HILL

SEE EO NO. 19A0198-H

LZPEX-HILL

DISTRIBUTION STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY. 2015-01-12. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 417 SCMS/GUEA, 6040 GUM LANE, HILL AFB, UT 84056-5819. WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATION OF THIS DOCUMENT IS CONTROLLED UNDER DOD DIRECTIVE 5230.25 AND AFI 61-204. DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENT OR RECONSTRUCTION OF THE DOCUMENT.

REV

REVISION

STATUS

OF SHEETS

B

SHEET 22

REV

C

A

-

B

A

B

C

B

C

C

C

B

C

B

B

B

A

A

B

A

B

SHEET

STEVEN THORNE

141103

RODNEY GOULD

150126

N/A

-

STEVEN THORNE

141103

RON MONTGOMERY

141110

Scott Kingsford

150126

LANDING GEAR

REQUIREMENTS DOCUMENT

201416605

A SEE SHEET 1

A

-----

201416605

A

1. SCOPE

1.1.

Purpose

This drawing establishes United States Air Force (USAF) engineering requirements for landing gear component part manufacture. The information provided herein is to be utilized as specified within contact requirements. Deviations or alterations to the specifications or processing requirements of this document must be approved by the USAF engineering procurement authority through appropriate contracting officer. 1.2.

Application

The contents contained herein provide technical information to clarify and update materials, methods and processing of USAF landing gear component part manufacture. Some sections are applicable for all procurements and therefore it is the contractor’s responsibility to understand and adhere to applicable sections in accordance with individual contract requirements.
1.3.

Safety

Materials, methods, applications and processes described or referenced in this drawing may involve the use of hazardous materials. This drawing does not address these hazards. It is the responsibility of the contractor to ensure familiarity with the safe appropriate use of hazardous materials and processes; and to take necessary precautionary measures to ensure the health and safety of all personnel.
1.4.

Approval

Any changes to this document must be approved by the USAF Landing Gear Systems Chief Engineer prior to publication.
1.5.

Key Words

Key words for some processes are listed in bold text within the applicable paragraph. These