Appendix C - Specifications

Appendix C - Specifications
Vector Network Analyzer
Technical Specifications:
• Two-port Vector Network Analyzer (VNA)
• Standalone bench unit with integrated display and mechanical button controls, 12.1 inch TFT color LCD with touch screen controls.
• 2-port configuration with Direct Receiver Access (DRA) breakout jumpers for both ports, or equivalent functionality, for advanced RF measurements. • 3.5 mm female RF connectors.
• Frequency range: 100 kHz to at least 26.5 GHz.
• Dynamic range: 135 dB or better.
• Frequency resolution: 1 Hz or better.
• IF bandwidth: Adjustable from 1 Hz to 10 MHz.
• Output power range: -55 dBm to +10 dBm with 0.05 dB resolution; level linearity ±0.5 dB • Trace noise: 0.005 dB rms, 0.012° rms or better
• Measurement capabilities: S-parameter measurements (S11, S21, S12, S22), reflection and transmission measurements, and time-domain analysis. SCPI access to receiver ratios. • Calibration capabilities:
Response, enhanced response, full two-port calibration, and TRL calibration. • Sweep capability: Linear, logarithmic, power, and time-domain measurements. • Measurement points: At least 100,000 points per sweep. • Connectivity: LAN and USB interfaces, with support for remote instrument control through SCPI or equivalent commands.
• Remote control: SCPI / Labview / IVI based on USB-TMC / VXI-11 / Socket / Telnet / WebServer.
• Video output: to external monitor, HDMI / DVI-D / DP
• Supplied with calibration certificate.
• 3-year warranty.
• NRTL Certified
Equivalent instruments meeting or exceeding these minimum performance requirements would be acceptable.
Maximum Acceptable Lead Time:
Our preferred delivery timeframe is within 8 weeks of receipt of the purchase order. However, we can accommodate a maximum lead time of 12 weeks after receipt of the purchase order (ARO).