Atch 2 Statement of Work

Solicitation: 1240LT27Q0017
Atch 2

US Department of Agriculture (USDA)

Statement of Work

Project
Winiger Ridge Dispersed Campsite Renovations
General Information

1.0 Scope of Work

This project involves the installation of new picnic tables and bear boxes at existing dispersed campsites 1-5 in the Winiger Ridge area. The campsites are located along NFSR 359.1 and 359.1A on the Boulder Ranger District of the Arapaho and Roosevelt National Forest and Pawnee National Grassland.

2.0 Background

This project is intended to provide enhanced recreation opportunities for dispersed camping in the Winiger Ridge area. Contractor Requirements

3.0 Technical Requirements / Tasks

The contractor will be required to purchase and install picnic tables and bear boxes in locations staked by FS staff. Picnic Tables
The concrete picnic tables consist of concrete bases with 3- 3” X12”X10’ planks for the table top. Salient Characteristics:










Steel reinforcement: Use #4, with reinforcement placed at least 1 1/2 in. covering top of rebar. Rebar ends must not be exposed.
Compressive strength: Concrete must achieve at least 5,000 psi at 28 days 1. Broad leg bases: Supports must extend full table width to provide stability directly on finished surface, eliminating need for base slabs 1.
Snow load resistance: Items must be designed to withstand 500 lbs/ft² snow load 1 Weight of concrete per leg: 281 lbs/1.9 CF Each
Table Legs Shall be “Davis’s Western Gold Integral colored concrete or approved equal. All Exposed steel members must be powder-coated in a flat black color. All wood surfaces to be stained with Olympic Semi-transparent stain in oxford brown or approved equal. Wood Planks must be rough sawn 3” x 12” x 10’ S4S, E.E. & F.O.H.C.

See Drawing 1 for details and dimensions.

Bear Boxes
The Bear boxes shall be certified bear resistant by the Interagency Grizzly Bear Committee (IGBC) certified. The bear boxes shall be constructed of 14-gauge corrosion resistant textured powder coated steel. The handles, striker plates and hardware shall be zinc coated and the piano hinges shall be stainless steel. Salient Characteristics:
 galvannealed steel on the entire cabinet
 A child safety release handle on the inside
 latch mechanism
 Assembled Width 48 in
 Assembled Height 40 in
 Assembled Length 29 in
 UV resistant powder coating- Brown color
 zinc coated hardware- Brown color
 Must be bolted to a cement pad