Attachment 1

CONTRACT

PRINTED

5305

11/04/2020

SPMYM327008

ATTACHMENT

PAGE

1FA
ITEM NO.
0001

CMMC: LEVEL 1

SECTION B

STOCK NUMBER

SMIC

5305-LL-DM1-2006

5F

ITEM NAME CAP SCREW, SLFLKG, NICUAL(K-MONEL), TYPE IV, FF-S-86E

SPECIAL CHARACTERISTICS

0.500"-13UNC-3A X 1.375" LONG

CLASSIFICATION "L" OR "P"

C DESCRIPTION/SPECIFICATIONS

C.1 MANUFACTURE CAP SCREWS IN ACCORDANCE WITH FED-SPEC. FF-S-86E

AND MIL-STD DRAWING MS18116. PARAGRAPH 6.2 (ORDERING DATA):

(A) "SCREW, CAP, SOCKET-HEAD", FF-S-86E OF MAY 29, 1987 AND

NOTICE 2 OF 22 FEB 02.

(B) TYPE IV (HEXAGON SOCKET, FLAT COUNTERSUNK HEAD, 82 DEG. ANGLE)

NICUAL. SIZE AN LENGTH AS SPECIFIED IN SECTION B OF THIS

SCHEDULE.
(C) MILITARY STANDARD (PART NUMBER) NOT APPLICABLE.

(D) MATERIAL TO BE NICKEL COPPER ALUMINUM IN ACCORDANCE WITH

QQ-N-286G, HOT FINISHED OR COLD DRAWN, ANNEALED AND AGE HARDENED.

FASTENERS MADE FROM QQ-N-286G FORM 1 MATERIAL SHALL BE SOLUTION ANNEALED

SUBSEQUENT TO HEADING AND THREADING, AND THEN AGE HARDENED. FASTENERS MADE FROM

QQ-N-286G FORM 2 MATERIAL SHALL HAVE THREADS CUT OR GROUND ONLY.

MATERIAL CERTIFICATION AS REQUIRED PER PARA. C.4.2 OF THIS

SCHEDULE.
NOTE: ONE HEAT IS REQUIRED FOR QUANTITIES OF 50 AND UNDER. (E) PROTECTIVE COATING NOT REQUIRED.
(F) CROSS DRILLING OF HEAD NOT REQUIRED.

(G) THREAD SERIES AND CLASS OF FIT TO BE AS SPECIFIED IN SECTION

B OF THIS SCHEDULE.
C.2 SELF LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-DTL-18240F(1) .

CLASSIFICATION TYPE SHALL BE AS SPECIFIED IN SECT. B OF THIS

SCHEDULE.

C.3 A MINIMUM OF SIX (6) DOTS APPROXIMATELY .032 INCHES IN DIAMETER

RAISED OR DEPRESSED APPROXIMATELY .010 INCHES ARE TO BE PLACED

ON THE HEAD OF THE FASTENER. (TOP PREFERRED OR SIDE LOCATION IF

NECESSARY DUE TO CONFIGURATION.)

C.4 DATA REQUIREMENTS:

C.4.1 CERT. OF COMPLIANCE.,

SEE EXHIBIT A, SEQUENCE A001

(APPLIES TO CAP SCREWS 1/2" DIAMETER AND LARGER ONLY)

C.4.2 CERT. OF MATERIAL/DATA.,

SEE EXHIBIT A, SEQUENCE A002

C.5 C524 MARKING & CERTIFICATION REQMNTS FOR CONTROLLED INDUSTRL MATL

(APPLIES TO CAP SCREWS 1/2" DIAMETER AND LARGER ONLY)

C.6 C500 MERCURY CONTROL (SUPPLIES)

CONTRACT

PRINTED

5305

11/04/2020

SPMYM327Q2008

ATTACHMENT

1FA

C.7 C531 RESTRICTIONS ON K-MONEL MATERIAL

D PRESERVATION/PACKAGING/PACKING

D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

D.2 D5 FASTENER PACKAGING REQUIREMENTS

E INSPECTION ACCEPTANCE

E.1 E1 RESPONSIBILITY FOR INSPECTION

E.2 E2 INSPECTION AND ACCEPTANCE (DESTINATION)

E.3 E504 NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD

H SPECIAL PROVISIONS

K Section
L Section
M Section

Reviewed by:

Code:245.2

Date: 11/4/2020