Attachment 1: SPI instructions

Form Approved

OMB No. 0704-0188

SPECIAL PACKAGING INSTRUCTION

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO.

NOMENCLATURE

2. CODE IDENT

3. SPI NO.

13028723 MACHINE GUN,CAL .50, M2A1 QUICK CHANGE BARREL W/ BII 19200

AM 13028723

4. NATIONAL STOCK NO.

6. REVISION / ERR NO.

5.DATE OF

DRAWING/SPI(YYMMDD)

160504

C/L16K3001

9. UNIT PACK WT. (LB) (0.0)

10. UNIT PACK CU (CU.
FT.)(0.000)

11. UNIT PACK SIZE (INCHES)(00.0)

135.0

5.477

52.0 X 14.0 X 13.0

1005-01-511-1250

7. QUP / UNIT OF

ISSUE

8. ICQ

1 EA

12. MILITARY PRESERVATION

MIL-STD-2073-1, METHOD 41

18.

STEPS

19.

REQD

20.

DESCRIPTION

SEE TEXT FOR DETAILED INSTRUCTIONS

13. CLEANING

*AND NOTES – Page 2

14. DRYING

*AND NOTES- Page 2

15. PACKING

a. LEVEL A

MIL-STD-2073-1

b. LEVEL B

MIL-STD-2073-1

16. MARKING

MIL-STD 129 AND NOTES- PAGE 4

17.

NOTES/DRAWINGS

SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED. * ITEMS SHALL BE CLEANED AND DRIED BY ANY PROCESS THAT IS NOT INJURIOUS TO THE ITEM. ALL ITEMS SHALL PASS THE APPLICAL CLEANING AND DRYING INSPECTION REQUIREMENTS OF MIL –STD-2073-1.