Attachment 1: Statement of Work

Low Pressure Air Compressor [LPAC]

STATEMENT OF WORK

1.

SCOPE

1.1. Portsmouth Naval Shipyard (PNSY) is seeking to lease one electric powered Low Pressure Air Compressor (LPAC). The applications are for establishing a Tool Air system. The compressed air system will have a dedicated compressor with controls, pressure regulator, storage tank, air dryer, distribution manifold, and compressed air hoses. All components are to be constructed into a single integrated unit; trailer mounted units are not permitted. The minimum allowable requirements for the system are detailed in the Statement of Work (SOW) below. The compressor plant shall be designed for outdoor use and will be subjected to inclement weather year round. The Contractor shall be responsible for supplying all fittings and adaptors required to make all equipment, manifold, & hose connections. The Contractor shall be responsible for setting up the compressors & support equipment and provide equipment startup and commissioning, as requested by PNSY. The application for the compressed air systems is located at Sub Base New London, CT.

2. APPLICABLE DOCUMENTS

2.1. Issues of Publications - The following documents in effect on the date of this requested proposal is a part of this specification to the extent applicable, or as specified herein. Within the specification, they shall be referred to by their basic designation only.

2.1.1. Government Furnished

2.1.1.1. General Specification For Integral Lifting Attachment Design 2.1.1.2. US Federal standard A-A-59326: Standard for cam action couplings.

2.1.2. Nongovernment Furnished

2.1.2.1. CGA G-7.1-2018: Commodity Specification for Air, Seventh Edition

2.1.2.2. ISO 8573-1:2001

2.1.2.3. OSHA 29 CFR 1910.169, Compressed Gas and Compressed Air Equipment, Air Receivers

2.1.2.4. NEMA Standard (NEMA 3)

2.2. Order of precedence - In the event of conflict between the text of this specification and that of the references cited above, the text of this specification shall take precedence. Nothing in this specification, however, shall supersede applicable laws or regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1. Component List

3.1.1. 100 HP LPAC Required components .

PIECE

NO.
PC-01
PC-02
PC-03
PC-04
PC-05
PC-06

QTY.
250 FT
200 FT

NAME OF PART

100 HP LPAC (400 CFM)

500 Gal Air Receiving Tank
400 CFM Desiccant Air Dryer

3 IN Air Hose

Manifold
Electrical Power Cable

Spec #: Naval Base New London, CT 400CFM LPAC System
Rev: 1

PARA NO.