Attachment 1: Statement of Work Renew Seals
Updated
A PDF document (68 KB) attached to Renewal Seals - Telescope Cylinder, from the Department of the Army. Due Nov 23, 2026, 12:30 PM (UTC-6).
File name: B01 - Attachment 0001 - Statement of Work Renew Seals 16NOV2026.pdf
The full file is for paid members, or buy this bid alone.
Preview
Statement of Work Renew Seals (Telescope Cylinder)
16 November 2026
Crane – Model - YB7720XL, Serial - 320418
To be performed by Authorized Grove Crane Dealer (Only)
Requirement - RENEW SEALS IN TELESCOPE CYLINDERS
ADDITIONAL_DESCRIPTION:
TRANSPORT CRANE To and from 1 C Tree Rd. McAlester OK, 74501 DISASSEMBLE BOOM TELESCOPING SECTIONS INSPECT WEAR PADS, SHEAVES, EXTEND RETRACT CABLES.
DISASSEMBLY AND INSPECT TELESCOPING CYLINDERS.
* IF NO DEFECTS ARE FOUND IN CYLINDERS
RENEW SEALS AND HOLDING VALVES. REASSEMBLE BOOM
SECTIONS.
MAKE CALIBRATION ADJUSTMENTS TO LSI RATED CAPACITY
LIMITER
PROVIDE ANNUAL CRANE INSPECTION/LOAD TEST PER,
29CFR.1926.1412(b)(1). A-B30.5-2.2.2
Must be OSHA Approved/Certified Facility, Maintenance Personnel and Inspector.
Mileage Limitation 110 Miles -- due to Excessive Large Size of Crane that must be hauled to Grove Crane Dealer with specialized permits for weight and oversized width. Specialized Highway routes must be used and with this kind of move it is not advantageous to the government to transport any further than absolutely required. The contractor shall obtain the COR approval for repair initiation and warranty purchases that exceed $200.00. A request for approval component and material purchase shall be sent to the COR. Once the determination has been made, the COR will then notify the contractor and proceed forward with the purchase. Repairs shall not commence until the Contracting Officer Representative has made final approval of the repair costs. After approval is received, the Contractor will initiate the repair or purchase request for parts, providing all parts and labor to correct the machine failure. Repair parts and installation shall carry the manufacturers’ standard commercial warranty. The Contractor shall warrant the services performed and/or parts utilized are in accordance with OEM specifications and all provided parts shall carry the standard commercial warranty.
The beginning of the document. Download the full file to read on.