Attachment 1: TDP

TECHNICAL DATA PACKAGE

NIIN:

LLDAD8077

ITEM NAME:

VERSION:

PAGE

SILVER BRAZE RINGS IPS 250

Jun 24, 2024

1. SCOPE

1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material.
1.2

Refined silver will be supplied as Government Furnished Material.

2. APP DOCS

2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.
2.2.1 "Document References" listed below must be obtained by the Contractor. included as an attachment to this contract/purchase order.

Ordering information is

2.3

DOCUMENT REFERENCES

SPEC NO.

SLASH NO.

PART NO.

REV

DATE

DISTR CD AMEND

ANSI/ASQ Z1.4

01/01/2008

A

ANSI/NCSL Z540.3

03/26/2013

A

ISO/IEC 17025

05/15/2005

A

ISO10012

04/15/2003

A

ISO_9001

11/15/2008

A

MIL-I-45208

A

07/24/1981

A

MIL-STD-45662

A

08/01/1988

A

QQ-B-654

A

02/10/1984

A

CHD NTC

SUPP

3. REQUIREMENTS

3.1 Manufacture and Design - The item furnished under this contract/purchase order must meet the requirements as specified in QQ-B-654, except as amplified or modified herein. QQ-B-654 ordering data information is provided below:
(a) Brazing alloys, silver; QQ-B-654
(b) Class - BCuP-5
(c) Size - O.D: .619"
Width: .063" +/- .003"
Thickness: .035" +/- .003"
Gap: .073" - .130"
Form - Pre-Formed Ring
(d) Level of packaging and packing must be as specified elsewhere in this Contract/Purchase Order. (e) Quantity per unit package must be as specified elsewhere in this Contract/Purchase Order. (f) Special marking must be as specified elsewhere in this Contract/Purchase Order. (g) Unit of Issue - Each
3.2 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is