Home / Utility Tractor Replacement / Document

Attachment 2: Specifications

Updated

A PDF document (856 KB) attached to Utility Tractor Replacement, from the Forest Service. Due Nov 25, 2026, 5:00 PM (UTC-5).

File name: Attachment 2 - Specifications.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

US Department of Agriculture (USDA)

Specifications statement: “Purchase of a utility tractor to be used on the Enoree Ranger District for use on various forest projects; wildlife opening planting, roadside mowing, and storm recovery efforts.”
Specific specifications on pages 2-7

Deliverables / Specifications
4x4 WHEELED UTILITY TRACTOR REQUIREMENTS. The Contractor shall provide the following new, current year, 4x4 Wheeled Utility Tractor with attachments that meets or exceeds the following specifications:

Item 1 – 4x4 WHEELED UTILITY TRACTOR MANDATORY SPECIFICATIONS

Motor

Minimum 120 Engine HP, Diesel
PowerQuad PLUS 16F/16R

Transmission

Drive
Wheels

Safety

Mechanical Front Wheel Drive (MFWD) w/turnable fenders: 3Rear Wheel Size(19.5L-24in)10PR R4 BIAS, Front Wheel Size (12.5/8018in)6PR I3 R4 Type Closed Operator station- Shall meet OSHA and Federal safety requirements and equipment standards in appendix A. Certified Roll Over Protection Structure (ROPS) shall be in accordance with 29CFR1926 and 30CFR56.14130. The certified ROPS will have a certification label on the unit or in the operator manual.

Hydraulics

Mechanical center link w/ball ends Cat2; Greater than 93 l/min hydraulic pump. Rear remote hydraulic connecters,
Hydraulic Pump Pressure (min): Steering/1958 psi, implement/2856 psi

Electrical
System

12 volt

PTO Drive

Three Speed PTO 540/540E/1000
3 Point Hitch; left hand adjustable lift link; Rear left fender

Hitch

hitch control; Draft links with Cat 2 telescopic ball end, category 2 center link, sway control blocks; rear lift capacity 5,150lbs

REQUIRED ADDITIONAL ITEMS

Hydraulic 3 mechanical stackable rear valves; 3 stackable mid SCV with mechanical Joystick controls;
Required to fit attachments: Rotatory cutter FC5012; Front End Loader H310 NSL

Delivery to address below: USFS, Savannah River Site, 1 Mile Inside Aiken Barricade, New Ellenton SC 29809

Contact POC to coordinate delivery to a

SECURE site.
POC: Michael Morris, ph: 803-457-3489
email: [email protected]

Appendix A— Equipment Standards
Reference

Content

29CFR1910.266 (f)(3)

1910.266(f)(3)(ii)(B)
Each machine manufactured after August 1, 1996, shall have ROPS tested, installed, and maintained in accordance with the Society of Automotive Engineers SAE J1040, April 1988, "Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mining Machines", which is incorporated by reference as specified in § 1910.6. 1910.266(f)(3)(ii)(C)

The beginning of the document. Download the full file to read on.

Other documents in this bid