Attachment 2: Statement of Work

STATEMENT OF WORK

DAF Heritage Program Maintenance, Fabrication, and Support Equipment

28 October 2026

1. BACKGROUND

This equipment directly supports Government curatorial, restoration, and preservation specialists in fulfilling statutory stewardship, conservation, and public display responsibilities for more than 3,500 historical aerospace vehicles, ballistic missiles, and drones. Government personnel carry out these preservation activities in accordance with DAFI 84-103, Department of the Air Force Heritage Program.

2. SCOPE

The Contractor shall furnish and deliver five (5) commercial equipment items to the National Museum of the United States Air Force (NMUSAF) located at Wright-Patterson Air Force Base (WPAFB), Ohio. The required equipment includes: one (1) Electronic Powered Rough Terrain Scissors Lift, one (1) Large Ride-on Floor Scrubber/Sweeper, one (1) Small Ride-on Floor Scrubber/sweeper, one (1) Mobile Welding Table, and one (1) Tool Storage Center.

3. TECHNICAL REQUIREMENTS

All equipment furnished under this contract shall be new (not used, re-conditioned, refurbished, or prototype) and standard commercial production models. 3.1. Electric-Powered Rough Terrain Mobile Scissor Lift The Contractor shall provide an electric-powered, rough-terrain, self-propelled mobile scissor lift meeting the following minimum salient characteristics: 3.1.1.
Lift Height, Reach, and Weight Capacity
3.1.1.1. Platform Working Height: Elevated platform height shall reach a minimum of 40 feet above ground level to permit technicians safe, direct overhead access to elevated suspended aircraft structural points. 3.1.1.2. Stowed Travel Height: Maximum stowed platform height shall not exceed 5 feet to maintain a low center of gravity during transit beneath lowhanging airframes. 3.1.1.3. Platform Load Capacity: Main platform weight capacity shall be 800 lbs minimum. The platform extension slide-out deck shall have a minimum load capacity of 300 lbs and provide at least 40 inches of horizontal extension to reach over wing roots without vehicle repositioning.
3.1.1.4. Elevation Speed: Full vertical lift and descent cycling time shall not exceed 60 seconds.
3.1.2.
Dimensions and Adjustability:

3.1.2.1. Dimensional Clearances: Overall vehicle width shall be between 50 inches minimum and 70 inches maximum (Shall Not Exceed 70”) to navigate standard museum hangar roll-up doors. Overall stowed length shall not exceed 132 inches.
3.1.2.2. Drive Control & Elevated Transit: Equipment shall feature