Attachment 3: CADPAD Item Marking Instruction (Ver 1.6)

CAD/PAD Item Marking Instruction, V 1.6

CAD/PAD Item
Marking Instruction
Prepared By
CAD/PAD Joint Program Office

NSWC IHD and AFLCMC/EBHJ

Version 1.6

Dated 06 March 2023

CAD/PAD Item Marking Instruction, V 1.6

1. Purpose

2. Scope

3. Marking Requirements

4. Placement of UID Markings

5. Items delivered in kit format

6. Waivers

References
NOTE: Use latest revision of all reference documents.
1. MIL-STD-130 Department of Defense Standard Practice Identification Marking of U.S. Military Property
2. MIL- STD-1168 (current revision) Ammunition Lot Numbering and Ammunition Data Card
(Note section 3.1 for new lot assignment for “remanufactured CAD/PAD Components”) 3. ISO/IEC 16022 Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification 4. ISO/IEC 15434 Information technology - Automatic identification and data capture techniques - Syntax for high capacity ADC media
5. ISO/IEC 15418 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance

6. UNDER SECRETARY OF DEFENSE FOR ACQUISITION POLICY AND

TECHNOLOGY Department of Defense Guide to Uniquely Identifying Items version 1.6 (this document is available on line at http://www.acq.osd.mil/dpap/pdi/uid/index.html or from Defense Procurement & Acquisition Policy, 3060 Defense Pentagon, Room 3E1044, Washington, DC 20301-3060)

7. DEFENSE FEDERAL ACQUISITION REGULATION SUPPLEMENT 252.211-7003

Item Identification and Valuation (Copies of this document are available on line at http://farsite.hill.af.mil/ or from the Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954)
8. AFSCM 21-556 Vol. 2 Julian Date format
9. ANS MH10.8.2 - 2006 Data Application Identifier Standard 10. ISO 28219 Labeling and Direct Product Marking with Linear Bar Code and TwoDimensional Symbols

CAD/PAD Item Marking Instruction, V 1.6

Figures

1. Determining IUID requirement

2. Sample UID Data Stream

3. Sample CAD/PAD Data Plate/Label

4. Sample of Etched Data

5. Sample CAD/PAD Small Item Data Plate/Label

CAD/PAD Item Marking Instruction, V 1.6

1. Purpose.
The Under Secretary of Defense has implemented policy requiring DoD components meeting the requirements identified in Figure 1 to be marked with Item Unique Identifiers (IUID). Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PAD) items, regardless of dollar value, are typically serially managed in aircraft maintenance data