Attachment 3 -Fenn Statement of Work

US Department of Agriculture (USDA)

Statement of Work

Project
FENN ROOFING : Bunkhouse and Cookhouse
General Information

1.0 Scope of Work

The project consists of removing and replacing the existing roof(s) with new roofing as specified in Section B, including underlayment materials, 16” cedar shingles, Cedar Breather, cedar saver, flashing, fascia, ridge caps (as required), and all other incidental work to complete the project. The existing roofing materials and items shall be disposed of off forest in accordance with all state and federal laws. The Contractor shall provide all materials and labor necessary to complete the work in a professional workman like manner and in accordance with attached specifications and manufacturer’s installation instructions and drawings. All lots of roofing materials must be from the same manufacturer to ensure consistency. Hand-nailing the shingles is required. Final cleanup shall be considered incidental to the work. The building(s) must be protected from leakage and exposure to the weather during removal of the existing roof and completion of the new roof.
Contractor shall be responsible for verifying roofing dimensions and for the repair of incidental damage to premises.

2.0 Background

Fenn Bunkhouse:
The Fenn Bunkhouse is a multi-story historic building, that has an 8:12 pitch hipped roof, that has 2 ridges, one valley, 5 hips, and a surface area of approximately 1800 square feet calculated using field dimensions. Due to the complexity of the roof design and to breakage of shingles during installation it is approximated that an additional 20% in materials will be required, or most nearly 2100 SQ FT. Lower edge of roof is approximately 16’ above ground level on the highest edge and 9’ above ground level on the other three faces. Contractor should field verify dimensions. This building is a historic building on the National Register of Historic Places, care should be taken to not damage exterior parts of the building or grounds not included in this contract. Fenn Cook house:
The Fenn Cook House is a multi-story historic building, that has an 8:12 pitch hipped roof, that has 5 ridges, 4 valleys, 7 hips, and a surface area of approximately 1950 square feet calculated using field dimensions. Due to the complexity of the roof design and to breakage of shingles during installation it is approximated that an additional 20% in materials will be required, or most nearly 2300 SQ FT. Lower edge of roof is approximately 9’ above ground level on the highest three sides and 5’ above ground level on the other faces. Contractor should