Attachment 3: PD Hi-Rail Excavator
Updated
A PDF document (102 KB) attached to Hi-Rail Excavator, Grapple, and Magnet, from the Department of the Army. Due Nov 16, 2026, 12:00 PM (UTC-6).
File name: B08_Attachment_0003__PD_Hi-Rail_Excavator_27Q7174.pdf
The full file is for paid members, or buy this bid alone.
Preview
PURCHASE DESCRIPTION
12-Month Rental of Hi-Rail Excavator and Attachments
Brand Name or Equal
1. Requirement
The Government requires the rental of one (1) hi-rail excavator and two (2) compatible attachments for a continuous 12-month rental period. The required equipment is intended for use up to eight (8) hours per day, four (4) to five (5) days per week. All equipment shall be furnished in safe, operational condition and be compatible for use together as a complete system. This is a brand name or equal requirement. The brand name references establish the salient characteristics required by the Government. Offerors proposing “equal” equipment shall clearly identify the proposed manufacturer and model number and submit product literature sufficient to demonstrate compliance with every salient characteristic listed below.
2. Brand Name Reference Equipment
The following equipment is brand-name reference:
1. BTE-326 Hi-Rail Excavator, with Rototilt PG80 and priority hydraulics/controls 2. BTE Sorting-Grapple, CB linkage, configured for BTE-325/BTE-326 set-up 3. BTE Hydraulic Magnet, 32-inch, chain configuration
3. Salient Characteristics / Minimum Requirements
CLIN 0001 — Hi-Rail Excavator
Quantity: One (1) each
Rental Period: 12 months
The contractor shall provide one (1) BTE-326 Hi-Rail Excavator or equal meeting the following salient characteristics:
•
Hi-rail excavator capable of on-rail and off-rail operation.
•
Engine power: 202 horsepower (150.6 kW).
PURCHASE DESCRIPTION
12-Month Rental of Hi-Rail Excavator and Attachments
Brand Name or Equal
•
Maximum on-track speed: 25 mph (40 kph).
•
Reach at ground level: 35.9 feet (10.9 meters).
•
Machine weight: 78,200 pounds (35,471 kilograms).
•
Overall width and height: 10.5 feet by 11.8 feet (3.2 meters by 3.5 meters).
•
Conventional swing radius.
•
Equipped with a Rototilt PG80 or equivalent tilt rotator system compatible with the excavator and required attachments.
•
Equipped with priority hydraulics/controls or equivalent hydraulic/control capability necessary to operate the required attachments.
•
Capable of handling heavy loads and track materials and transitioning between ontrack and off-track operations.
CLIN 0002 — Sorting Grapple
Quantity: One (1) each
Rental Period: 12 months
The contractor shall provide one (1) BTE Sorting-Grapple, CB linkage, configured for BTE325/BTE-326 equipment, or equal, meeting the following salient characteristics: •
Hydraulic sorting grapple.
•
CB linkage or equivalent linkage/interface.
The beginning of the document. Download the full file to read on.