Attachment 3: Performance Work Statement

ATTACHMENT 3

1240BE27Q0007 Little Missouri NG Road Maintenance

Performance Work Statement
USFS, Dakota Prairie Grasslands, Little Missouri NG Road Maintenance

General Information

1.0 Scope of Work

This contract consists of performing annual road, campground road, and trailhead maintenance throughout the Little Missouri National Grassland. This work is being solicited as a “performance- based” service contract. The term “performance-based” indicates the Contractor is responsible for achieving an end product. The Contractor shall furnish all labor, material, equipment, tools, transportation, and supplies necessary to complete the work according to the contract.

2.0 Background

Project Description and Location
The work consists of annual road, campground road and trailhead maintenance specified here in. Road maintenance work to be performed will be on National Forest System Roads and Trailheads within the Little Missouri National Grassland in Golden Valley, Billings, Slope, and McKenzie Counties, North Dakota. All work and equipment shall be in compliance with the terms, specifications, and provisions of this contract. All equipment shall be in good operating condition, clean, meet all safety standards and shall be operated by competent operators experienced in the work.
Contractor Requirements

3.0 Technical Requirements / Tasks

The contractor shall be required to have a mapping program, like Avenza Maps, on their smart phone, tablet or GPS device that can read the pdf maps provided in the contract to display and locate the contract items. Road, Trailhead/Parking Lot and Camping Spurs Grading
The intent of this contract, as it pertains to the road grading by the mile and each Trailhead, parking lot or camping spur, is to meet the criteria described in technical specifications. 











Grading roads, trailheads and spurs shall consist of restoring the original cross section, grade and alignment. including shoulders and turnouts, remove ruts, berms washes, slough, and other irregularities that prevent normal runoff.
After the finish blading, the roads, trailheads and spurs shall: Have been bladed shoulder to shoulder and end to end, including turnouts Blade and shape when moisture content is suitable for compaction, as determined by the COR. Be crowned ±5% from centerline).
Have no surfacing material wasted.
Have ditches, lead off ditches, rolling dips, water bars and other drainage facilities cleaned of obstructions and graded to drain.