Attachment A Statement of Work

Scope of Work
Privacy Screening Secure Parking Lot InstallationHouston Field Office

1.0 Scope and Intent

Houston Field Office requires a contractor to furnish all labor, supervision, materials, equipment, tools, fasteners, transportation, and incidentals necessary to provide and install black privacy screening at the Houston Field Office secure parking-lot perimeter fencing, entry/exit gates, and sallyport fencing. The purpose of this requirement is to provide maximum visual screening for Government vehicles and assets located within the secure parking area.

2.0 Place of Performance

Houston Field Office126 Northpoint DriveHouston, TX 77060 Work is to be performed outdoors at the identified facility.

3.0 Requirements

3.1 General Requirements

The contractor shall:
Furnish and install new, commercial-grade, exterior privacy-screening material. Provide black screening material that provides 100 percent visual blockage or an equivalent product that provides complete visual screening when viewed from outside the fence line. Ensure the material is suitable for continuous outdoor use in Houston, Texas, climate, including normal exposure to sunlight, wind, rain, humidity, and temperature conditions. Provide screening material with a minimum expected service life of five years under normal outdoor conditions. The contractor shall provide manufacturer product information or other documentation supporting this requirement. Install the screening using industry-standard methods and hardware appropriate for the existing fence type. All straps, ties, fasteners, clips, tensioning devices, and other installation accessories shall be included. Ensure the installation is neat, secure, properly tensioned, and free of loose edges, gaps, sagging, or sharp exposed materials. Remove and properly dispose of all contractor-generated debris and leave the work area in a clean condition upon completion. Coordinate work scheduling and site access with the Government point of contact. No removal, replacement, or modification of existing fence fabric, fence panels, posts, rails, gates, access-control equipment, or other site features is authorized unless specifically approved in writing by the Contracting Officer.

3.2 Back Fence and Entry/Exit Gates

The contractor shall furnish and install privacy screening on the existing back perimeter fence and entry/exit gates as follows: Quantity: Approximately 540 linear feet, including the entry and exit gates. Height: 6 feet.
Material: Black, 100 percent visual-blockage privacy screening, or an approved equivalent.