B.01.3 Pre-Soliciation Synopsis

Action Code: P

Date: 21 October
Year: 2026

Contracting Office Zip Code: 25701

Classification Code: 9520 – Structural Shapes
Contracting Office Address:
US Army Corps of Engineers, Huntington District 502 8th Street, Huntington, WV 25701-2018

Subject: RRRF-MRS-Stamford De-Watering Box Material PH 1 Proposed Solicitation Number: W9123727QA011
Closing Response Date: 28 October 2026

Contact Points:
Bradley Adkins, Contract Specialist 304-399-5270
Amy Davis, Contracting Officer, 304-399-5907
Contract Award Number: N/A

Contract Award Dollar Limit: N/A
Contract Line Item Number: N/A

Contract Award Date: N/A
Contractor: N/A

Description:

Purpose
This solicitation provides for the purchase of materials outlined below. Material must be delivered within 8 weeks of the award date.

1.1 Material: ASTM 1018 CR round bar.
1.a 6 1/2” dia round, 8’ long qty 6

2.1 Material: ASTM A434 CL bc (Q&T).
2.a 4” dia solid, 8 ft long, qty 20

3.1 Material: ASTM A53 Seamless pipe

3.a 1 ½” Dia Sch 40, qty 500 ft
3.b 3” dia Sch 40, 2

4.1 Material: ASTM 1026 tubing seamless

4.a 8” dia, 1.125 wall thickness, 20 ft long qty 1

5.1 Material: ASTM A36

5.a 1” dia round solid, 20 ft long, qty 2
5.b 2” flat bar, ½” thick, 20’ long. qty 2
5.c 2 /2” flat bar, ½” thick, 20’ long, qty 4

6.1 Material: ASTM 709 Gr 50 for zone 2 (Plate)
6.a ¾” thick 4’ wide 8’ long qty 18
6.b ½” thick 4’ wide 8’ long, qty 28
6.c 1” thick 5’ wide 10’ long, qty 8
6.d ¾” thick 5’ wide 10’ long, qty 4

7.1 Material: ASTM A709 Gr 50 for zone 2, T-Beam
7.a WT 7x37, 20’ long, 12

8.1 Material: ASTM A709 Gr 50 for zone 2, Flat bar
8.a 4” thick, 10” wide, 10’ long, qty 30
8.b 1” thick, 25” wide, 10’ long, qty 30
8.c 2” thick, 3” wide, 10’ long, qty 30
8.d ¼” thick, 2” wide, 10’ long, qty 30

9.1 Material: ASTM A36

9.a ¼” thick, 4’ x 8’ plate, qty 25
9.b ¾” thick, flat bar 3” wide, 20’ long, qty 4
9.c 3/8” thick, flat bar 3” wide, 20’ long, qty 4

10.1 Material: ASTM 709 Gr 50 for zone 2,
10.a Rolled Skin plate with weld bevels marked in yellow in the attached drawings.

11.1 Material: ASTM 709 Gr 50 for Zone 2.
10.a Seal Bar shapes and qty is attached in drawings.

12.1 Fasteners: ASTM A325

12.a 1” dia 8, TPI, 8” length
12.b 1” dia DTI, Washers, qty 500
12.c 1” dia 8, TPI, Heavy Hex Nut, qty 500
12.d 1” dia 8, TPI, Jam Nut, qty 500
12.e 1 1\2”, 6 TPI. 7” long, with Castle Nut Cotter Pin, qty 100

Documentation
All material will be delivered with the applicable and traceable mill certification and testing reports attached, sent via email to the listed POC at award.