C-53 Bravo Timber Sale Statement of Work
Updated
A PDF document (197 KB) attached to C-53 Bravo Timber Sale - EGLIN AFB, FL, from the Department of the Air Force. Due Dec 17, 2026, 10:00 AM (UTC-6).
File name: C-53 Bravo Timber Sale SOW.pdf
The full file is for paid members, or buy this bid alone.
Preview
STATEMENT OF WORK
FOR
C-53 BRAVO TIMBER SALE
Eglin AFB, FL
November 2026
STATEMENT OF WORK
FOR
C-53 BRAVO TIMBER SALE
TIMBER SALE
1. The contractor shall provide all management, tools, supplies, equipment and labor necessary for timber removal services at Eglin Air Force Base, Florida. This sale consists of harvesting all merchantable Sand pine trees and Slash pine trees designated by the base forester. There are two harvest units under 1 Contract Line Item Number (CLIN). The CLIN consists of 264.5 acres and contains approximately 12,545 tons of pine timber. Bidders are encouraged to visit the site and cruise the timber prior to submitting their bid. Timber will be sold on a lump-sum basis where the winning bidder pays 100% of the bid price at the start of the contract. Timber to be sold is located within harvest units 26N48 and 26P51. The harvest units are located in an area open to the general public. See attached maps for the location in Okaloosa County on Eglin AFB, Florida. Detail maps and more specific cruise data may be obtained from the Natural Resources Branch, 107 HWY 85 North, Niceville FL 32578. 1.1. BASIC SERVICES.
a. Contractor is required to comply with Florida Best Management Practices (BMP’s) for silviculture to protect and maintain the State’s water quality, during all activities. b. All merchantable Sand pine and Slash pine in the sale area under this contract shall be cut and removed by the contractor in such a manner that result in the least possible damage to residual trees. Previously reforested areas are not to be used for roads, loading areas, or otherwise disturbed in any manner by the Contractor's operations. c. A limbing gate may be used at all sale areas.
d. The location of all loading decks must be pre-approved by the Contracting Officer or their representative and shall be located within the boundaries of specific work areas, a minimum distance of 200 feet from any major road, and a minimum of 100 feet from any watercourse. The Contracting Officer’s representative may give approval for locating loading decks outside of specific work areas if it becomes necessary.
e. Trees lodged during felling shall be pulled down immediately by the operator. f. Contractors are warned that timber may contain metal. g. Stumps shall be cut as low to the ground as possible and no higher than 6 inches above ground.
h. All logging debris shall be removed by the Contractor to a minimum distance of 10 feet from all improved grounds, right-of-ways, roads, fences, bridges, culverts, streams and other
The beginning of the document. Download the full file to read on.