CNC Multiple Application Sensor System (Mass) Scanning CMM System Specifications (003)

Specifications for Large Multisensor Zeiss CMM Coordinate Measurement Machine at Arnold Air Force Base, TN; Arnold Engineering Development Complex (AEDC)
Provide all materials, labor, and equipment necessary to provide a new fully functional Multiple Application Sensor System, (Mass) Scanning Coordinate Measurement Machine. Refurbished or remanufactured machine or parts are not authorized for this requirement. Precision Inspection Machine Specifications:
The specific machine brand/model is the Zeiss CMM Prismo 16-24-14, Item 622916-9999-010. •

Machine General
o Measuring Volume X= 1600 mm (63.0”), Y=mm (94.5”), Z=1400mm (55.1”) o Bridge-Type CMM with Moveable Bridge
o VAST probing measurement technology
o Pre-wired for tactile active and tactile passive sensors o Pc-based integrated Scanning Control
o Integrated active vibration dampening
o Temperature sensors for workpiece
o Thermal insulation of granite base

•

Measuring Capabilities
o VAST G-D1 Active Scanning with scan rate of up to 500 points/s o VAST XXT TL3 Tactile Sensor supporting 30/150mm axial and 65 mm radial measurement
o RDS-D-CAA Articulating Unit for optical and contact sensors with rotation increments of 2.5°
o Axis Travel Speed of up to 300 mm/s and Vector Travel Speed of up to 520 mm/s o Axis Acceleration of up to .8 mm/s and Vector Acceleration of up to 1.38 mm/s o Stylus Max Length up to 800mm and Max Weight up to 600 Grams including stylus adapter

•

Sensors and Accessories
o Zeiss Sensor Mount Adapter, ID Encoded RDS to VAST XXT Adapter Plate o Sensor Storage Receptacle for Storing VAST Probe heads on MSR Rack o 3-Position Rack for Holding VAST XXT TL1 or TL3 Adapter Plates o M5 compatible, 23-Piece Stylus System Kit consisting of 5 aluminum extensions, 6 tungsten shaft styli with ruby balls and 2 connection joints.

•

Compatible Data Analysis Stand Alone Workstation

o HP Z4 V5 Performance Workstation Includes:
 Windows 11 IOT Enterprise 64-bit Operating System, LTSC  Intel Xeon W-2123 3.6 4C 2123 3.6 4C CPU

 64GB RAM (4X16GB) DDR4 2666 ECC REG2 CPU

 NVIDIA T1000 4GB 1st GFX

 512 GB HP Turbo 1st SSD

 4TB 7200 RPM SATA 2nd HDD

 ACRONIS Backup V16 for PC License
o Workstation Accessories
 27” Monitor 2560x1440 QHD HDMI DP
 OFFiceJet Pro 9110B HP Printer
 Cable USB-2.0 A-4pin/B-4pin 1.8m
 Compatible Keyboard and Mouse
 Display swivels for portrait or landscape viewing
 All connection cables
•

Software
o CALYPSO cnc+nav+perf+prob SWSet Dgl Lic