Draft 201 MFP Statement of Work - Purchase Request Number - - Rev. 5 (002)

STATEMENT OF WORK (SOW)

F108-201 MAIN FUEL PUMP (MFP)

PURCHASE REQUEST NUMBER: FD2030-24-01595

DRAFT

PREPARATION DATE: 7 AUGUST 2024

REV: 5

PREPARING ORGANIZATION:

421st Supply Chain Management Squadron (SCMS)/GUMBA
Air Force Sustainment Center (AFSC)
and in conjunction with
Air Force Life Cycle Management Center (AFLCMC)/LPSDB

TINKER AFB, OK 73145-3031

File No: FD2030-24-01595

SECTION I

SCOPE

1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.20
1.21

Introduction
General Services and Material
Receiving
Remanufacture
Over & Above
FAA Form 8130-3
Reference & Technical Manuals
Quality System and Quality Assurance Plan
Deficiency Report (DR)
Condemned Asset
Counterfeit Prevention Plan
Reporting
Contractor Manpower Reporting
Document Storage
Packaging and Handling
Item Unique Identification (IUID)
Surge
Preservation
Shipping and Transportation
Safety
Contractor Identification to Government Employees
Mission Essential Services

DRAFT

SECTION II

2.0
2.1
2.2

Government Property
Government Furnished Material (GFM)
Government Furnished Property (GFP)

APPENDIX ‘A’

Acronyms

APPENDIX ‘B’

CAV Reporting Requirements

File No: FD2030-24-01595

SECTION II

1.0

Introduction: This Statement of Work (SOW) defines the requirements necessary to ensure that delivered remanufactured F108-201 Main Fuel Pump (MFP’s) are remanufactured as nearly as possible to original life expectancy consistent with Air Force (AF) requirements set forth herein. This SOW applies to the following National Stock Numbers (NSN) and Part Numbers (P/N):

INPUT NSN

2915-01-241-9239PN

INPUT P/N

708400-1 (301-779-101-0)
708400-2 (301-779-102-0)
708400-3 (301-779-103-0)
708400-4 (301-779-104-0)
708400-5 (301-779-105-0)

OUTPUT NSN

OUTPUT P/N

2915-01-241-9239PN

708400-5 (301-779-105-0)

The instructions stipulated are brief, concise statements providing general requirements for the disassembly, cleaning, inspection and remanufacture of the F108-201 MFP. The contractor shall maintain a Federal Aviation Administration (FAA) Part 145 rated facility rated to remanufacture CFM56-2B engine components; contractor must have the remanufacture capabilities to include appropriate technical data, remanufacture documents, and license agreements required to accomplish remanufacture of F108-201 MFP. The contractor is responsible for the production, remanufacture and scheduled delivery of a quality product.