Draft 2501 APP C RoadMTNC LeverichHelio

Leverich Helio Stewardship IRSC

Custer Gallatin National Forest
Bozeman Ranger District

APPENDIX C

C(T)5.31# – ROAD MAINTENANCE REQUIREMENTS. (9/04) Contractor shall maintain roads in accordance with the following Contract Road Maintenance Requirements Summary:

PRE HAUL

ROAD

TERMINI

FROM

TO

MILES

P705

0.0

1.93

1.93

C

C

P705F

0.0

0.59

0.59

C

C

T-101

ROAD MAINTENACE T-SPECIFICATIONS

T-301

DURING HAUL

DRAFT

ROAD

TERMINI

FROM

TO

MILES

P705

0.0

1.93

1.93

C

C

P705F

0.0

0.59

0.59

C

C

T-101

ROAD MAINTENACE T-SPECIFICATIONS

T-301

POST HAUL

ROAD

TERMINI

FROM

TO

MILES

P705

0.0

1.93

1.93

T-101

C

ROAD MAINTENACE T-SPECIFICATIONS

T-301

C

Notes:
C = Contractor Performance Item
The maximum volume of Contractor responsibility for Slide and Slump repair is 20 cubic yards O = Optional Contract Line Item
NFSR = National Forest Service Road
CR = County Road
P= Private Road

Leverich Helio Stewardship IRSC

Custer Gallatin National Forest
Bozeman Ranger District

ROAD MAINTENANCE T-SPECIFICATIONS FOR STEWARDSHIP CONTRACTS

Contractor shall maintain roads in accordance with the following Contract Road Maintenance Requirements Summary:
Contractor will be responsible for doing all pre, during and post haul road maintenance with no compensation from the Forest Service.

T-SPECIFICATIONS

T-SPEC NUMBER

T-101
T-301

SPECIFICATION TITLE

Surface Blading
Ditch Cleaning

DRAFT

Leverich Helio Stewardship IRSC

Custer Gallatin National Forest
Bozeman Ranger District

ILLUSTRATION OF ROAD STRUCTURE TERMS

DRAFT

Leverich Helio Stewardship IRSC

Custer Gallatin National Forest
Bozeman Ranger District

T SPECS FOR TIMBER SALE CONTRACTS (2/2017)

SPECIFICATION T-101 SURFACE BLADING

DESCRIPTION

1.1 Surface blading is keeping the native or aggregate surfaced road in a condition to facilitate traffic, minimize additional future maintenance, reduce erosion, and provide proper drainage. It includes maintaining the crown, inslope or outslope of the traveled way and shoulders, drainage dips, leadoff ditches, berms, turnouts, removal of minor slides and slumps, and other irregularities that prevent normal runoff from the road surface.

REQUIREMENTS

3.1 Surface blading shall be performed as often as necessary and to the standards required to facilitate traffic and proper drainage.

DRAFT

3.2 The blading shall be performed in such a manner as to preserve the existing cross section and to conserve surface materials. On gravel surfaced roads, the base must not be disturbed and no surface material may be bladed into the ditch or over the road shoulders. Blading of native surface roads shall be performed so no base material under four (4) inches in the greatest