Draft Breast plates and Waist plates PD
Updated
A PDF document (272 KB) attached to SOURCES SOUGHT-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates, from the Department of the Army. Due Oct 29, 2026, 12:00 PM (UTC-4).
File name: DRAFT Breast plates and Waist plates PD.pdf
The full file is for paid members, or buy this bid alone.
Preview
INCH-POUND
MIL-DTL-1563/12B
6 January 2014
SUPERSEDING
MIL-B-1563/12A
30 April 1997
DETAIL SPECIFICATION SHEET
INSIGNIA, U.S.M.A., BUCKLE, WAISTPLATE
This specification is approved for use by all
Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.
DASH NO.
-1: Top
-2: Bottom
MATERIAL: Yellow Brass 65/35 (UNS Alloy C-268)
FINISH: Mirror-like Polish Fronts, Matte Finish back and edges. MARKING FOR IDENTIFICATION: Back of buckle
AMSC N/A
Source: https://assist.dla.mil -- Downloaded: 2015-01-21T21:17Z Check the source to verify that this is the current version before use.
FSC 8455
MIL-DTL-1563/12B
DIMENSIONS:
HEIGHT:
-1: 2-3/16 inches + 1/64 inch (REF)
-2: 2-7/32 inches+ 1/64 inch (REF)
WIDTH
-1: 3 inches + 1/64 inch (REF)
-2: 1-5/8 inches + 1/64 inch (REF)
THICKNESS: 0.080 inch + 0.002 inch
SUGGESTED PACKAGING: Standard Commercial:
1. UNIT PACKAGING: Each wrapped.
2. INTERMEDIATE PACKAGING: 50 waistplates per box.
WAISTPLATE:
1. Waistplates shall conform to the dimensions shown.
2. -1 shall be dapped to radius of 3-1/2 inches + 1/2 inch along the horizontal plane.
NOTE:
The term (REF) refers to measurements taken from the Government furnished hub or die. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian:
Army - IH
Preparing activity:
Army - IH
Review activity:
DLA - CT
(Project No. 8455-2014-014)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
Source: https://assist.dla.mil -- Downloaded: 2015-01-21T21:17Z Check the source to verify that this is the current version before use.
INCH-POUND
MIL-DTL-1563/13B
6 January 2014
SUPERSEDING
MIL-DTL-1563/13A
30 April 1997
DETAIL SPECIFICATION SHEET
INSIGNIA, U.S.M.A., BUCKLE, BREASTPLATE
This specification is approved for use by all
Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.
MATERIAL: Yellow Brass 65/35 (UNS Alloy No. C-268)
FINISH: Mirror-like Polished Fronts, Matte Finish Back and Edges
The beginning of the document. Download the full file to read on.