Exhibit B - Specification

SPECIFICATION MIL-F-24951B (SA)

Not Measurement
Sensitive

MIL-F-24951B (SA)

10 FEBRUARY 1995

SUPERSEDING

MIL-F-24951A (SA)

17 NOVEMBER 1993

MILITARY SPECIFICATION

FUEL OIL RECLAIMED

This specification is approved for use by the Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
1.

SCOPE

1.1 Scope. This specification covers Fuel Oil, Reclaimed (Stock Number NSN 9140-01-068-6903) which is produced as a product of Navy reclamation operations (product use is described in 6.1). 2.

APPLICABLE DOCUMENTS

2.1

Government documents.

2.1.1 Standards. The following standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to Commanding Officer, Navy
Petroleum Office, 8725 John J. Kingman Road, Suite 3719, Fort Belvoir, VA 22060-6222, by using the self-addressed
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
FSC 9140

AMSC N/A

DISTRIBUTION STATEMENT A. Approved for public release;
distribution is unlimited.

STANDARDS

FEDERAL

FED-STD-313 - Material Safety Data Sheets

EXHIBIT B

SPECIFICATION MIL-F-24951B (SA)

FED-STD-791 - Lubricants, Liquid Fuels, and Related
Products; Methods of Testing

MILITARY

MIL-STD-105 - Sampling Procedures and Tables for
Inspection by Attributes
MIL-STD-290 - Packaging of Petroleum and Related Products Unless otherwise indicated, copies of Federal and Military specifications, standards and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building #4, Section D, Philadelphia, PA 19111-5094.
2.2 Non-Government Publications. The following documents form a part of this specification to the extent specified herein. The issues of the documents which are indicated as DOD adopted shall be the issue listed in the current DODISS and the supplement thereto, if applicable.

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

D 88
D 93
D 97
D 129
D 287
D 396
D 445
D 473
D 482

- Saybolt Viscosity
- Flash Point by Pensky-Martens Closed Tester,
Test Method For (DOD adopted)
- Pour Point of Petroleum Oils, Test Method For