Home / Hydraulic Actuator Flow Test Stand / Document

Hydraulic Actuator Flow Test Stand - Statement of Work

Updated

A Word document (83 KB) attached to Hydraulic Actuator Flow Test Stand, from the Department of the Navy. Due Dec 2, 2026, 5:00 PM (UTC-5).

File name: Hydraulic Actuator Flow Test Stand (HAFTS) - SOW.docx

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

STATEMENT OF WORK

HYDRAULIC ACTUATOR FLOW TEST STAND

SCOPE:

This statement of work (SOW) describes the minimum specifications and requirements necessary to purchase one (1) new Hydraulic Actuator Flow Test Stand (HAFTS) for the E2-C/E2-D Platform. The new test stand will replace an existing test stand manufactured by Dayton T. Brown. No building modifications or alterations are prescribed for this project or within this SOW.

DESCRIPTION:

The purpose of this SOW is to provide details for a Turn-Key operation for an Offeror to provide parts, labor, and materials delineated by contract scope specified by the SOW, to include but not limited to; installation, start-up, commissioning, validation, calibration, and training for HAFTS located at Naval Air Station (NAS) North Island, CA, Fleet Readiness Center Southwest (FRCSW), in Building 472 Hydraulic Shop. The quality, size, and capacity shall be no less than the minimum specification outlined in Section 4 of this SOW.

APPLICABLE DOCUMENTS AND REFERENCES

Government Documents:

Specifications, Standards, and Handbooks. The following specifications, standards, and handbooks are a part of this requirement. to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the latest issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto.

Federal Documents:
FED-STD-H28B - Screw Thread Standards for Federal Services (1994 edition). FED-STD-313F – Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities MIL-STD-130N – Identification Marking of U.S. Military Property (2007 edition) MIL-PRF-81836B – Filter and Disposable Element, Fluid Pressure (1998 edition) MIL-S-8512D – Support Equipment, General Specification for Design (2002 edition) (Copies of Federal and military specifications, standards, and handbooks are available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402-0001) Environmental Protection Agency (EPA)
40 CFR 82: Protection of Stratospheric Ozone
40 CFR 761: Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions (Application for copies should be addressed to the EPA Ariel Rios Building 1200 Pennsylvania Avenue, N.W. Washington, DC 20460) Government Documents, Drawings, and Publications
FY21 NAVAIR METCAL scheduling letter
Courtesy Layout Drawing – FRCSW Building layout of physical location with electrical and water connections (when applicable)

The beginning of the document. Download the full file to read on.

Other documents in this bid