I A.03 Purchase Description - Salient Characteristics for a MS2085A Analyzer

Specifications or Salient Characteristics for a MS2085A Analyzer

The MS2085A is a highly portable, next-generation 2-port handheld analyzer designed specifically for field installation and maintenance of RF communication systems. It covers a broad frequency range of 5 kHz to 4 GHz or 6 GHz and seamlessly combines cable and antenna analysis (CAA) with advanced 2-port Vector Network Analyzer (VNA) functionalities. Salient Characteristics & Features
Characteristic
Details
Port Configuration
2-Port, 1-Path setup allowing standard reflection and transmission measurements. Rugged Touch Display
Features a large 10.1-inch capacitive touchscreen (1280 x 800 resolution) with IK08 impact protection (built to withstand a 5-joule impact). Highly Portable Design
Weighs less than 7 lbs (under 3.2 kg), optimized specifically for field technicians. High Sweep Speed & Resolution
Fast sweep rate of 350 µs per data point with up to 10,049 maximum data points for high-resolution analysis. Split Screen View
Supports simultaneous dual-trace viewing (e.g., Return Loss and Distance-to-Fault (DTF) or DTF and Time Domain Reflectometry (TDR)) . Direct Reporting
Features a built-in PDF/HTML report generator to compile and save test results directly on-site.

Key Technical Specifications
Frequency & Power
Frequency Range: 5 kHz to 4 GHz (Option 904) or 5 kHz to 6 GHz (Option 906). Frequency Accuracy: $\le \pm 2.5 \text{ppm}$ (typical) with aging of $\pm 1 \text{ppm}$ per year. Frequency Resolution: 1 Hz.
Output Port Power: Settable in 0.1 dB steps (Port 1 power range: +9 dBm to -45 dBm depending on frequency). VNA & Transmission Measurements
Dynamic Range (Transmission): $>100 \text{dB}$ up to 3 GHz (typical $>105 \text{dB}$ dynamic range). IF Bandwidth selections: 10 Hz to 100 kHz.
Calibration Stability: Excellent drift performance with standard factory default 1-Port ReadyCal, OSL, and FlexCal capabilities. Supported Measurement Types
Reflection: Return Loss, VSWR, Cable Loss, Smith Chart, 1-Port Phase, TDR (Ohm/Linear), and Distance-to-Fault (DTF). Transmission (Option 21): 2-port transmission measurements (S21). Vector Voltmeter (Option 15): Ideal for cable phase matching applications. Connectivity & Environmental
RF Ports: Rugged Type-N (female), $50\ \Omega$ impedance. Data Interfaces: RJ45 Gigabit Ethernet, two USB 3 Type-A, and one USB 3 Type-C (USBTMC). Battery Life: 5 to 6 hours of continuous operation (typically up to 9 hours with accessory battery pack setups).