I.P-2 ABRASIVE GRIT BAG SPECIFICATIONS

ABRASIVE GRIT BAG SPECIFICATIONS LSN 5350-HM-CN1-4678:

 FOR USE WITH: GRIT, SANDBLAST, UTILITY GRADE, #16-30 SIEVE SIZE, MIL-PRF-22262(LATEST), 2000

LBS/ONE TON, 5:1 SAFETY FACTOR

 TUBULAR DESIGN

 190 GSM OR 5.5 OZ PER SQ YARD MINIMUM THICKNESS, UNCOATED FABRIC, UV TREATED

 4/10” ABOVE BAG WHITE PICK-UP POINT LOOPS

 14 X 18 INLET SPOUT WITH WEB TIE (PLAIN DUFFLE TOP ACCEPTABLE).

 1.5” WHITE PICK-UP POINT PERIMETER BAND

 10 X 20 OUTLET SPOUT W/ STAR CLOSURE

 STAR CLOSURE HAS PROTECTIVE FLAP CORD ROPE

 3.0 MIL MINIMUM THICKNESS LDPE INNER LINER ATTACHED WITH 8 TABS

 LARGE ROPE LOCK ON OUTER CLOSURE

 (2) 12 X 12 ZIP LOCK POUCHES SEWN IN TOP SEAM, (SAME SIDE AS PRINTED COMPANY LOGO, IF LOGO IS

PRINTED ON BAG). DO NOT COVER PRINTED INFO

 ADDITIONAL MARKING REQUIREMENTS, EACH SACK SHALL BE MARKED WITH THE FOLLOWING INFO:

1) STOCK NUMBER: 5350-HM-CN1-4678

2) BATCH OR LOT NUMBER (DOCUMENTATION/COCs SENT FOR ALL BATCHES/LOTS SUPPLIED MUST

MATCH BAG MARKINGS)

NOTE: VENDOR TO INSERT FIBERBOARD OR PLYWOOD BETWEEN EACH BAG & PALLET TO PREVENT SAGGING AND PUNCTURE FROM LIFTING FORKS. EXERCISE CAUTION IF STACKING FOR SHIPMENT, USING PROPER DUNNAGE AND SHORING.
6/16/2022 revised by adding 6.5 oz/sy outer bag fabric weight. Changed 4.0mil inner liner to 3.0 mil.
7/5/2022 revised outer bag fabric weight from 220gsm & 6.5 oz/sy to 190gsm & 5.5oz/sy. Added “plain duffle top acceptable” in lieu of top inlet.