IPD 5640 01 371 3262
Updated
A Word document (21 KB) attached to NSN 5640013713262; Insulation Block, Thermal, from the Federal Acquisition Service. Due Nov 20, 2026, 5:00 PM (UTC-5).
File name: IPD_5640-01-371-3262.docx
The full file is for paid members, or buy this bid alone.
Preview
NSN: 5640-01-371-3262
INSULATION BLOCK, THERMAL: Shall be in accordance with MIL-DTL-24688 Revision A Amendment 1 dated June 28, 2022 and QPL-24688. (As of the issue date of this IPD, no qualified sources for this material exist on the referenced QPL. Procured items must still be in accordance with MIL-DTL-24688.) Material shall conform to the following salient characteristics:
TYPE II:Faced panel
CLASS 1:Fibrous glass cloth faced (thermal)
MATERIAL:Polyimide foam, open-cell
LENGTH:36.0 inches nominal
WIDTH:24.0 inches nominal
THICKNESS:2.0 inches nominal
MIL-DTL-24688 – Detail Specification: Insulation, Thermal and Acoustic Absorptive, Cellular Polyimide Foam
Copies of this document are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or online at https://qpldocs.dla.mil/.
UNIT OF ISSUE: SH (Sheet).
PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/GHS standards will be required. Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4) Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.
MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.
Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).
PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:
The beginning of the document. Download the full file to read on.