JUSTIFICATION FOR SOLE SOURCE

JUSTIFICATION FOR SOLE SOURCE ($15K-$350K)

Ref: FAR 13.106-1(b)
The service or material listed on (Document number)6080-0220 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.
Restricted to the following source or brand name. Provide original manufacturer's name. (If a sole source manufacturer distributes via dealers, ALSO provide dealer information.) Manufacturer: ZEOCHEM LLC
Manufacturer POC & Phone Number: 800-424-9300
Mfr. Address:

1360 S. 12TH STREET

LOUISVILLE, KY 40210

Manufacturers Dealer/Rep PACIFIC CONSOLIDATED INDUSTRIES (PCI)[CAGE 75906]

12201 MAGNOLIA AVENUE

RIVERSIDE, CA.
92503

[951]289-5229 POC FIORELLA SINNEMA <[email protected]>

CORPORATE URL- WWW.PCIGASES.COM

X Description of the item or service required, the estimated cost, and required delivery date.

SIEVE, NITROGEN ABSORPTION, ZEOCHEM NITROGEN LOADING DISSICANT [750 POUNDS]

PCI GASES P/N 582416-004

RDD 11NOV2026 [ARO 110 DAYS UPON AWARD]

X Specific characteristics of the material or service limit the availability to a sole source or particular brand name (unique features, function of the item, etc.). Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.
THIS DESICANT IS FOR NITROGEN ABSORPTION THAT RESULTS IN OXYGEN CONCENTRATION FOR THE VSA CHAMBER ASSEMBLY PART NUMBER 795844-001. THE CHAMBER IS USED IN A VSA MODULE – 300 LPM GOX SYSTEM PART NUMBER 795562-001 ONLY THIS SPECIFIC NTIROGEN REMOVAL MEDIA IS AUTHORIZED FOR USE IN THIS SYSTEM EXCLUSIVELY.
ALL CHEMICAL & MOLECULAR SPECIFICATIONS FOR THIS MEDIA AND THE OTHER COMPONENTS IT INTERACTS WITH CONTAIN ENGINEERING DESIGN THAT IS SUBJECT TO PROPRIETARY PROPERTY AND INTELLECTUAL COPY RIGHTS.
THIS IS A DIRECT REPLACEMENT OF AN APPROVED IN-SERVICE SYSTEM IN WHICH THEY MUST INTERFACE WITH OTHER COMPONENTS NECESSARY FOR THE SYSTEM TO OPERATE AND FUNCTION SATISFACTORILY. ANY CHANGE IN FORM, FIT OR FUNCTION WILL RESULT IN TOTAL SYSTEM FAILURE AND THE INTERFACE WITH THE ASSOCIATED EQUIPMENT AND COMPONENTS.
X The requested material or service represents the minimum requirements of the Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

X The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.