Lead in Paint test results

Eurofins Built Environment Testing
3113 Red Bluff Road Pasadena, Texas 77503
Phone: (713) 290-0223 – Fax: (832) 831-5669
www.EurofinsBuiltEnv.com

Lead in Paint Performed by
Flame AA – USEPA SW846 7000B/3050B (Mod.)
Order #:
Project #:
Receipt Date:
Analysis Date:
Report Date:

Mike Lawrence
Now Environmental Services
34009 9th Ave S, Suite A12
Federal Way, WA 98003

4601950
S26-0509
30-Jun-2026
6-Jul-2026
6-Jul-2026

USACE Dworshak Project

SAMPLE

ID

PAINT

COLOR

LEAD

CONCENTRATION

(ppm)

LEAD

CONCENTRATION

(%)

L1

Grey

< 50

< 0.005%

Reporting Limit = 50.0 ppm N/A = Not Applicable
INS = Insufficient Sample Weight NS = Not Submitted

Analyst: Alexander Benavidez
Scott Ward, Ph.D. Lab Director
Results apply to the sample as received and relate only to the items tested. The analysis has been conducted according to the method(s) listed above. Blank corrections are not applied to data unless requested by the customer. This report is for the exclusive use of the addressed customer and shall not be reproduced except in full without written approval by Eurofins J3 Resources, Inc. (EJ3). EJ3 is an EPA NLLAP recognized lab by the AIHA-LAP, LLC ELLAP (Lab ID: 157714). Unless otherwise noted, all quality control samples performed within specifications established by the laboratory. The estimated accuracy is solely based on recovery data from internal laboratory control samples at the 95% confidence interval (k = ~2) of the level of concern, derived from a 336.9 mg/Kg lead in paint certified reference material. The estimated accuracy does not account for uncertainty associated with the sampling process. Accuracy = +/-13%