LWT 042-001

SHIP:

N/A

COAR:

LOCAL WORK TEMPLATE

<<INSERT ACTIVITY>>

ITEM NO:

042-00

N/A

PCN:

N/A

LWT FILE NO:

042-001

CMP:

N/A

REVISED:

31 OCT 2025

PLANNER:

N/A

1.

SCOPE:

1.1 Standard Welding Procedure Specification for Naval Applications; procure and demonstrate
1.2

Location of Work:
1.2.1

1.3

Contractor Facility

Identification:

1.3.1 AWS-NAVSEA B2.1-1-302:2015 Standard Welding Procedure

Specification for Naval Applications for Naval Applications for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8" [3 mm] through 1-1/2" [38 mm] Thick, MIL-7018-M, in the As-Welded or PWHT Condition, Primary Plate and Structural Naval
1.3.2 Carbon steel (S-1) test assembly weldment, approximately 1/2 in X 14 in X 15 in.

2.

REFERENCES:

2.1

FY 26 CH-1, Standard Items

2.2 AWS-NAVSEA B2.1-1-302:2015, Standard Welding Procedure Specification for Naval Applications for Naval Applications for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8" [3 mm] through 1-1/2" [38 mm] Thick, MIL-7018-M, in the As-Welded or PWHT Condition, Primary Plate and Structural Naval
2.3 S9074-AQ-GIB-010/248 Rev 1, Requirements for Welding and Brazing Procedure and Performance Qualification
2.4

MIL-STD-22D, Welded Joint Design

2.5 MIL-STD-1689 Rev A, Fabrication, Welding, and Inspection of Ships Structure
2.6
3.

MIL-STD-2035 Rev A, Nondestructive Testing Acceptance Criteria

REQUIREMENTS:

3.1 Procure the Standard Welding Procedure Specification for Naval Applications (SWPS-N) identified in 1.3.1 for the demonstration and testing of the test assembly weldment of 1.3.2. See Note 4.1. 3.1.1 For each SWPS-N, the contractor performing the welding shall enter the name of the contractor and each fabrication document on the SWPS-N for which the SWPS-N will be used. All SWPS-N requirements shall be met and those requirements shall not be modified 3.1.2 Submit one legible copy, in approved transferrable media, of a signed copy of the SWPS-N to the SUPERVISOR. Document in Enclosure (One).

ITEM NO: 042-001

EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S. International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.

3.2 Personnel welding SWPS-N verification welds shall be regular employees of the contractor (i.e., not subcontractors or temporary specialists) and under the full supervision and control of the activity.