Mercedes Benz Dump Truck Specificiations

SPECIFICATION

4 Mar 26

DUMP TRUCK

THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S

STANDARD EQUIPMENT AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. Dump Truck, Mercedes Benz, 6x6, 2026 model year or later 1.2. Capable of safely loading, transporting, and dumping at least 24 yd3 (18.3 m3) of material, with maximum payload capacity of at least 27.6 tons (25 tonnes)

1.3. Two-door cab

1.3.1. Left-hand drive (LHD) steering

1.3.2. All instrument gauges in metric units, with English language (where applicable) 1.3.3. Heating, defrosting, and air conditioning systems

1.4. Diesel engine

1.4.1. Capable of operating long term on ultra-high sulfur diesel fuel as high as (10,000 ppm)

1.4.2. Engine brake

1.5. Automatic or automated manual transmission

2. CHASSIS EQUIPMENT

2.1. Locking or limited slip differentials

2.2. Two front frame-mounted tow hooks or eyes

2.3. Air brakes and ABS

2.4. On/off road tires

2.5. Left and right-side grab handles provided on exterior of cab 2.6. Front-mounted, self-recovery winch with at least 22,000 lb. (9,979 kg) capacity

2.7. Brushguard with headlight protection

2.8. Full-size spare wheel assembly with holder
2.9. A 46 piece, 10 unit ANSI first aid kit, which meets ANSI Z308.1-2003 2.9.1. Cold compress and first aid booklet also included 2.9.2. Metal case with gasket-sealed lid to contain all items

2.10. Back-up alarm

2.11. Electric horn and air horn

2.12. Two orange, rotating beacons, LED, or strobe-type warning light bar installed on the top of the cab 2.13. Two 5 gallon (or 20 liter) jerry cans
2.13.1. One jerry can labeled "Potable Water" in English 2.13.2. The other labeled "Diesel Fuel" in English
2.13.3. Stowage location for the jerry cans on the truck which doesn't interfere with operations

2.14. Vehicle language markings in English

2.15. OEM color

2.16. Corrosion Protection (Carwell or similar) if delivery includes any sea travel

3. DUMP BODY

3.1. Minimum volume of 24 yd3 (18.3 m3) with a dump angle of approximately 45° 3.2. Payload capacity at least 27.6 tons (25 tonnes)

3.3. Dump Body

3.3.1. Sides, front wall, and floor made from at least AR400 steel 3.3.2. Spreader apron made from at least AR400 steel
3.3.3. A front-mounted telescopic hoist with doghouse

3.3.3.1. Hydraulic cylinder with greaseable pins

3.3.4. Air-operated tail-gate latches

SPECIFICATION

4 Mar 26

3.3.5. 1/2 cab guard

3.3.6. Heavy-duty rear hinges with greaseable and removable pins

3.3.7. PTO with heavy-duty, hydraulic pump