MRD Surveillance Cameras rev
Updated
A PDF document (215 KB) attached to RFQ - AFRL/RFY Video Surveillance System, from the Department of the Air Force. Due Nov 12, 2026, 12:00 PM (UTC-5).
File name: MRD Surveillance Cameras rev 4Nov26.pdf
The full file is for paid members, or buy this bid alone.
Preview
Minimum Requirements Document
RFYIF Camera replacement
Document Date: 4 Nov 2026
Requirements/Salient Characteristics:
1) Quantity – 9 units - Bosch FLEXIDOME 8100i NDE-8702-RX Full HD HDR Outdoor Network Camera
i. Type of camera:
1. Fixed outdoor PTRZ IP dome camera with remotely configurable motorized pan, tilt, roll, zoom, and autofocus adjustment capability. The camera shall provide outdoor environmental protection at least IP66 and IP67.
2. The camera shall use at least a 1/1.8-inch CMOS image sensor and provide Full HD 1080p video resolution.
3. The camera shall provide HDR X with a high dynamic range capability of at least 141 dB for operation in high-contrast scenes.
4. The camera shall provide automatic day/night operation using a motorized mechanical IR-cut filter or equivalent capability to transition between daytime color imaging and nighttime monochrome imaging.
5. The camera shall provide at least one RJ-45 Ethernet interface supporting 10/100/1000 Base-T Gigabit Ethernet connectivity and Power over Ethernet (PoE). 6. The camera shall include a motorized varifocal lens with remote zoom and autofocus capability and low-light imaging performance suitable for outdoor surveillance applications.
Note to Offeror: Bosch identifies the NDE-8702-RX as a fixed 2 MP outdoor PTRZ dome with a 1/1.8inch CMOS sensor, HDR X at 141 dB, a motorized varifocal lens, autofocus, day/night operation, and IP66/IP67/IP6K9K environmental protection.
ii. Air Force and Department of War Physical-Security Directives: 1. The camera and associated video-management, network, storage, installation, and operating processes shall support compliance with applicable Air Force and Department of Defense physical-security, cybersecurity, authorization, and configuration-management requirements.
iii. Security Standards:
1. The camera shall support a hardware-based device-security capability, including a secure element or Trusted Platform Module (TPM), secure boot, signed firmware, and authenticated secure firmware-update capability.
2. The camera shall support password-protected administrative access, encrypted communications, device certificates, and HTTPS or equivalent encrypted management communications.
3. The camera shall support cybersecurity configuration and device hardening consistent with the deployed Bosch firmware version, Government network architecture, approved cybersecurity baseline, and video-management-system configuration.
The beginning of the document. Download the full file to read on.