NonComp Redacted

ARP 53.12-1
JUN 2026
[

MEMORANDUM TO THE FILE FOR AMS PID: GXM-0154

Subject: DECISION TO RESTRICT COMPETITION FOR COMMERCIAL ACQUISITION

UNDER THE SIMPLIFIED ACQUISITION THRESHOLD (SAT)

IDENTIFICATION OF SOURCE Vendor Name: Fisica Applied Technologies Vendor City/State:
San Leandro, CA
CAGE Code: 1TS25
Total Dollar Value: $
RFO FAR 12.102(a) authorizes the use of restricting competition for acquisitions of commercial products and commercial services not exceeding the SAT when the Contracting Officer determines that only one source is reasonably available due to circumstances such as urgency, exclusive licensing, brand-name requirements, or industrial mobilization.
In accordance with RFO FAR 12.102(a), this memorandum documents the absence of competition for this commercial acquisition. Only one source will be solicited for this requirement (or a portion thereof), and the total value is not expected to exceed the SAT.

I.

DESCRIPTION OF ITEM OR SERVICE:

Spark Gap Switch 200KV Qty 20 P/N 50264
Cathode Tip, Hemisphere Qty 5 P/N T000064327
RDD 2/8/2027

II.

THE DETERMINATION FOR USE OF RESTRICTING COMPETITION IS BASED ON THE

FOLLOWING: <Select applicable sole-source rationale category> ONLY ONE RESPONSIBLE SOURCE (select all that apply):
RESTRICTIVE RIGHTS. The source has established proprietary rights, limited rights in data, patent rights, copyrights or secret processes in the item or service required.

EXCLUSIVE LICENSING AGREEMENTS. The item or service is only available from the Original Equipment Manufacturer (OEM), or there is only one authorized distributor or technical representative for the OEM.

OTHER REASONS. Other reasons not identified above. Provide details on mission impact if requirement is not solicited from only one source. Fisica Applied Technologies(previously L3 Applied Technologies) is the OEM of the Short-Pulse Gamma (SPG) that was purchased on N00164-20-C-GM69. The SPG requires spark gap switches that are also made by Fisica. These switches are tailored to our Gov't owned SPG machine. To develop and alternate design, the Government would have to invest in reverse engineering the existing design and manufacture of the Switch. It is estimated to take

ARP 53.12-1
JUN 2026
[

approximately 1 2-man years and a cost of
for engineering effort to design
components and develop a supplier base for the components, assembly, and testing. This would also void all warranties that are in place for the SPG.

BRAND NAME: Item required must be a brand name product, or feature of a product,