Rev 0
Updated
A PDF document (333 KB) attached to RFI U-10Mo Fuel Fabrication, from the Department of Energy. Due Dec 21, 2026, 4:00 PM (UTC-8).
File name: SPC-70872_Rev_0 (1) (1).pdf
The full file is for paid members, or buy this bid alone.
Preview
Document ID: SPC-70872
Revision ID: 0
Effective Date: 2/19/2024
Specification
U.S. High Performance Research Reactor
Project
Specification for
Low-Enriched Uranium
U-10Mo Fuel Fabrication
The INL is a U.S. Department of Energy National Laboratory operated by Battelle Energy Alliance.
Idaho National Laboratory
SPC-70872
Effective Date: 2/19/2024
Identifier:
SPECIFICATION FOR LOW-ENRICHED
Revision:
URANIUM U-10MO FUEL FABRICATION
Applicability:
Manual: Stand alone
Type: Specification
(This page intentionally left blank)
Page: 2 of 21
eCR Number: 712983
Idaho National Laboratory
SPC-70872
Effective Date: 2/19/2024
Identifier:
SPECIFICATION FOR LOW-ENRICHED
Revision:
URANIUM U-10MO FUEL FABRICATION
Page: 3 of 22
Revision Log
Rev.
Date
Affected Pages
2/19/2024
All
Revision Description
Initial release
Idaho National Laboratory
SPC-70872
Effective Date: 2/19/2024
Identifier:
SPECIFICATION FOR LOW-ENRICHED
Revision:
URANIUM U-10MO FUEL FABRICATION
Page: 4 of 22
1.
2.
3.
4.
4.1.
4.2.
4.3.
4.4.
5.
Idaho National Laboratory
SPC-70872
Effective Date: 2/19/2024
Identifier:
SPECIFICATION FOR LOW-ENRICHED
Revision:
URANIUM U-10MO FUEL FABRICATION
Page: 5 of 22
5.1.
5.2.
5.3.
5.4.
5.5.
5.6.
6.
7.
Idaho National Laboratory
SPC-70872
Effective Date: 2/19/2024
Identifier:
SPECIFICATION FOR LOW-ENRICHED
Revision:
URANIUM U-10MO FUEL FABRICATION
Page: 6 of 22
1. SCOPE
This specification defines the requirements for the various product forms needed to produce Fuel Elements for use in the following reactors:
•
Advanced Test Reactor (ATR)
•
Advanced Test Reactor Critical Facility (ATRC)
•
Massachusetts Institute of Technology Reactor (MITR)
•
University of Missouri Research Reactor (MURR)
•
National Bureau of Standards Reactor (NBSR)
This specification addresses the following product forms: •
U-10Mo Alloy: A coupon, billet, ingot, plate, rod, extrusion, or any other geometric form of 90 wt% uranium 10 wt% molybdenum (U-10Mo) intended for use in fabrication of Fuel Foils.
•
Fuel Foil: A thin sheet of U-10Mo Alloy with a zirconium Interlayer.
•
Fuel Plate: A product which contains a Foil encapsulated and bonded within Cladding.
•
Fuel Element: A mechanical assembly comprised of Fuel Plate(s) and non-fueled parts.
Idaho National Laboratory
SPC-70872
Effective Date: 2/19/2024
Identifier:
SPECIFICATION FOR LOW-ENRICHED
Revision:
URANIUM U-10MO FUEL FABRICATION
Page: 7 of 22
2. APPLICABLE CODES, PROCEDURES, AND REFERENCES
Applicable portions of the documents identified below form a part of this specification. Where
The beginning of the document. Download the full file to read on.