Revised Womens Overblouse Purchase Specification

PURCHASE SPECIFICATION: OVERBLOUSE,

WOMEN'S

Document Control Number: UQC S-02-06A | GL-PD-11-07
Revision Date: October 2024 (Supersedes edition dated 14 April 2008) Preparing Activity: Army - GL • GL-Army • S-02-06A-OVERBLOUSE ASU • INCH-POUND

1. SCOPE

1.1 Scope

This purchase description covers the requirements for a long and short sleeve women's overblouse to be worn as part of the Army Service Uniform (ASU).

1.2 Classification

The overblouse shall be one type in the following classes and sizes: Class 1: Short Sleeve
Class 2: Long Sleeve
Schedule of Sizes
Short Torso (S): 4S, 6S, 8S, 10S, 12S, 14S, 16S, 18S, 20S, 22S Regular Torso (R): 4R, 6R, 8R, 10R, 12R, 14R, 16R, 18R, 20R, 22R Long Torso (L): 4L, 6L, 8L, 10L, 12L, 14L, 16L, 18L, 20L, 22L Extra Large (XL): 8XL, 10XL, 12XL, 14XL

Note: The Class 2 (long sleeve) overblouse is available in five sleeve lengths: Short, Regular, Long, X-Long, and XX-Long.

2. APPLICABLE DOCUMENTS

2.1 General

The documents listed in this section are specified in sections 3, 4, and 5 of this specification. This section does not include documents cited in other sections of this specification or

recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in sections 3, 4, and 5 of this specification, whether or not they are listed.

2.2 Government Documents

2.2.1 Specifications, Standards, and Handbooks

The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the solicitation or contract.

FEDERAL SPECIFICATIONS

V-B-871 – Button, Sewing Hole and Button, Staple

FEDERAL STANDARDS

FED-STD-4 – Glossary of Fabric Imperfections

COMMERCIAL ITEM DESCRIPTIONS

A-A-50199 – Thread, Polyester Core, Cotton- or Polyester-Covered

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-DTL-32231B – Cloth, Polyester/Cotton (Active Standard - Supersedes GL/PD 08-

01)

MIL-DTL-32075 – Label: For Clothing, Equipage, and Tentage (General Use) MIL-T-43624 – Thread, Polyester, Spun
MIL-C-44296 – Cloth, Fusibles

FEDERAL ACQUISITION REGULATIONS (FAR)

52.209-4 – First Article Approval - Government Testing

2.3 Non-Government Publications

The following documents form a part of this document to the extent specified herein.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

AATCC Test Method 88B – Smoothness of Seams in Fabrics after Repeated Home