RFK SOR 27-005 Lifeboat Davits Spinkler Pump Repairs

ABSTRACT

The purpose of this item is to accomplish repairs to the vessel’s lifeboat davits and sprinkler pumps.

REFERENCES

Reference
IMO Resolution MSC.402(96) + Corr.1 (adopted on 19 May 2016) Requirements for maintenance, thorough examination, operational testing, overhaul and repair of Lifeboats, Rescue Boats, Launching Appliances and Release Gear USCG NVIC 03-19, Maintenance, thorough examination, operational testing, overhaul and repair of Lifeboats and Rescue Boats, Launching Appliances and Release Gear

INSTALLATION OPERATION AND MAINTENANCE MANUAL DAVIT P-LD24

Enclosure

USCG 835s

ITEM LOCATION/DESCRIPTION/QUANTITY

Location
Lifeboat No. 1 (03-203-1)
Lifeboat No. 2 (03-203-2)
Description
Lifeboat Davit
Mfg: Palfinger
Model: P-LD 24
Winches
Mfg: Palfinger
Model: W150
Quantity: Two systems

GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICE: None

NOTES

Place of Performance: NAVSTA Norfolk, Pier 8
Period of Performance: 10 NOV – 13 NOV 2026
POC: Michael CipolaPrincipal Port EngineerUSNS Robert F. Kennedy (T-AO 208)Military Sealift CommandMobile: 757-364-4346Office: [email protected] A “Fall Preventer Device” (FPD) can be used to minimize the risk of injury or death by providing a secondary alternate load path in the event of failure of the on-load hook or its release mechanism or of accidental release of the on-load hook. The Coast Guard considers the “make” to refer to the equipment manufacturer. The Coast Guard considers the “type” to refer to the Coast Guard approval series for the equipment.

QUALITY ASSURANCE REQUIREMENTS: None Additional

STATEMENT OF WORK REQUIRED

Provide service of OEM Service facility to accomplish following: POC LAWRENCE O’MARAInside Sales RepresentativePALFINGER MARINE USA, LLC.Work + 1 337 399 1633Mobile +1 757 395 9099E-Mail [email protected]

Inspect, service and test the ships Lifeboat Launching Appliances and Releasing Gear using References 2.1.1 through 2.1.3 as guidance. Adhere to the requirements of 29 CFR §1915.86 for occupational safety and health standards for shipyard personnel working on Lifeboats. Before any employee works in or on a stowed or suspended lifeboat, the employer will secure the lifeboat independently from the releasing gear to prevent it from falling or capsizing. The employer will not permit any employee to be in a lifeboat while it is being hoisted or lowered, except when the employer demonstrates that it is necessary to conduct operational tests or drills over water, or in the event of an emergency.