RFO Combo - Supply UNDER SAT Videoscope

Combined Synopsis/Solicitation
Supply
Solicitation # FA812527Q0004
A27-022 Videoscope

Tinker AFB, OK
The Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMA, Road A, Bldg 3705, Tinker AFB, OK 73145-3303) anticipates the award of a Firm Fixed Price (FFP) contract for Videoscope. This is a combined synopsis/solicitation for commercial products prepared in accordance with RFO FAR part 12. This announcement constitutes only solicitation. Offers are being requested and a separate written solicitation will not be issued.

This acquisition is Total Small Business Set-Aside

NAICS 334519 FSC 6650 Size 600

The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

DESCRIPTION

DESCRIPTION/PRODUCT

1. The requested equipment item description/specifications are outlined below. • Shall be a commercial off-the-shelf (COTS) item.
• Shall be compliant with the Trade Agreements Act (TAA). • Shall have a total system weight not exceeding 20 pounds. • Shall be delivered fully assembled and ready for use. • Shall include an operations and maintenance manual.
Insertion Tube
• Shall include an insertion tube with a length between 3 and 6 meters. • Shall have a maximum outer diameter of 4 millimeters. • Shall provide a minimum 80-degree field of view.
• Shall have a forward-facing direction of view.
• Shall include forward-facing light-emitting diode (LED) lighting. • Shall have a minimum ingress-protection rating of IP54. Controls and Articulation
• Shall have a joystick control to maneuver the videoscope. • Shall have a minimum of four-way, 120-degree articulation at the distal end of the videoscope, controllable by the joystick.
Display and Main Unit
• Shall include a color, touchscreen display measuring between 6.5 and 12 inches. • Shall provide a minimum display resolution of 1,920 × 1,080 pixels. • Shall include a backlit display.
• Shall contain a support strap or handle to hold the main unit during use. Measurement and Modeling Capabilities
• Shall be capable of taking the following live measurements:

• Length between two points.
• Length between a point and a user-defined line.
• Orthogonal height distance between a point and a user-defined plane. • Surface area of a user-defined region.
• Shall be capable of modeling surfaces recorded in three dimensions (3D). Power, Recording, and Storage • Shall be battery powered. • Shall be capable of recording still images in a compressed Joint Photographic Experts Group (JPEG)