Item Description Videoscope

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)

TINKER AIR FORCE BASE OKLAHOMA

23 September 2026

MEMORANDUM FOR RECORD

SUBJECT: Item Description, A27-022 Videoscope.
1. The AMXG group is requesting utilization of funds for the purchase of One (1) Videoscope. 2. The requested equipment item descriptions/specifications are outlined below. 





Shall be a commercial off-the-shelf (COTS) item.
Shall be compliant with the Trade Agreements Act (TAA). Shall have a total system weight not exceeding 20 pounds. Shall be delivered fully assembled and ready for use.
Shall include an operations and maintenance manual.

Insertion Tube
 Shall include an insertion tube with a length between 3 and 6 meters.  Shall have a maximum outer diameter of 4 millimeters.  Shall provide a minimum 80-degree field of view.
 Shall have a forward-facing direction of view.
 Shall include forward-facing light-emitting diode (LED) lighting.  Shall have a minimum ingress-protection rating of IP54. Controls and Articulation
 Shall have a joystick control to maneuver the videoscope.  Shall have a minimum of four-way, 120-degree articulation at the distal end of the videoscope, controllable by the joystick.
Display and Main Unit
 Shall include a color, touchscreen display measuring between 6.5 and 12 inches.  Shall provide a minimum display resolution of 1,920 × 1,080 pixels.  Shall include a backlit display.
 Shall contain a support strap or handle to hold the main unit during use. Measurement and Modeling Capabilities
 Shall be capable of taking the following live measurements:  Length between two points.
 Length between a point and a user-defined line.
 Orthogonal height distance between a point and a user-defined plane.  Surface area of a user-defined region.
 Shall be capable of modeling surfaces recorded in three dimensions (3D).

Power, Recording, and Storage
 Shall be battery powered.
 Shall be capable of recording still images in a compressed Joint Photographic Experts Group (JPEG) format.
 Shall be capable of recording videos in a Moving Picture Experts Group-4 (MP4) format.  Shall be capable of storing images, videos, 3D models, and measurements on a removable Secure Digital (SD) card.